AM79C940KCW AMD [Advanced Micro Devices], AM79C940KCW Datasheet - Page 58
![no-image](/images/no-image-200.jpg)
AM79C940KCW
Manufacturer Part Number
AM79C940KCW
Description
Media Access Controller for Ethernet (MACE)
Manufacturer
AMD [Advanced Micro Devices]
Datasheet
1.AM79C940KCW.pdf
(122 pages)
- Current page: 58 of 122
- Download datasheet (831Kb)
Bit
Bit 2–1 RES
Bit 0
Transmit Frame Status (XMTFS)
The Transmit Frame Status is valid when the XMTSV bit
is set. The register is read only, and is cleared when
XMTSV is set and a read operation is performed. The
XMTINT bit in the Interrupt Register will be set when any
bit is set in this register.
Note that if XMTSV is not set, the values in this register
can change at any time, including during a read opera-
tion. This register should be read after the Transmit Re-
try Count (XMTRC). See the description of the Transmit
Retry Count (XMTRC) for additional details.
Bit
Bit 7
Bit 6
XMTSV
58
AMD
UFLO
APAD XMT Auto Pad Transmit. APAD XMT
XMTSV
UFLO
Name
Name
LCOL
MORE
activation of the RESET pin or
SWRST bit. DXMTFCS is sam-
pled only when EOF is asserted
during a Transmit FIFO write.
Description
Reserved. Read as zeroes. Al-
ways write as zeroes.
enables the automatic padding
feature. Transmit frames will be
padded to extend them to 64
bytes including FCS. The FCS is
calculated for the entire frame in-
cluding pad, and appended after
the pad field. APAD XMT will
override the programming of the
DXMTFCS bit. APAD XMT is set
by activation of the RESET pin or
SWRST bit. APAD XMT is sam-
pled only when EOF is asserted
during a Transmit FIFO write.
Description
Transmit Status Valid. Transmit
Status Valid indicates that this
status is valid for the last frame
transmitted. The value of XMTSV
will not change during a read op-
eration.
Underflow. Indicates that the
Transmit FIFO emptied before
the end of frame was reached.
The transmitted frame is trun-
cated at that point. If UFLO is set,
TDTREQ will be de-asserted,
and will not be re-asserted until
the XMTFS has been read.
ONE
DEFER
(REG ADDR 3)
LCAR
RTRY
Am79C940
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
LCOL
MORE
ONE
DEFER
LCAR
RTRY
Late Collision. Indicates that a
collision occurred after the slot
time of the channel elapsed. If
LCOL is set, TDTREQ will be de-
asserted,
re-asserted until the XMTFS has
been read. The MACE device
does not retry after a late
collision.
More. Indicates that more than
one retry was needed to transmit
the frame. ONE, MORE and
RTRY are mutually exclusive.
One. Indicates that exactly one
retry was needed to transmit the
frame. ONE, MORE and RTRY
are mutually exclusive.
Defer. Indicates that MACE de-
vice had to defer transmission of
the frame. This condition results
if the channel is busy when the
MACE
transmit.
Loss of Carrier. Indicates that the
carrier became false during a
transmission. The MACE device
does not retry upon Loss of Car-
rier. LCAR will not be set when
the DAI port is selected, when
the 10BASE-T port is selected
and in the link pass state, or dur-
ing any internal loopback mode.
When the 10BASE-T port is se-
lected and in the link fail state,
LCAR will will be reported for any
transmission attempt.
Retry Error. Indicates that all at-
tempts to transmit the frame
were unsuccessful, and that fur-
ther attempts have been aborted.
If Disable Retry (DRTRY in the
Transmit Frame Control register)
is cleared, RTRY will be set when
a total of 16 unsuccessful at-
tempts were made to transmit the
frame. If DRTRY is set, RTRY in-
dicates that the first and only at-
tempt to transmit the frame was
unsuccessful. ONE, MORE and
RTRY are mutually exclusive. If
RTRY is set, TDTREQ will be de-
asserted, and will not be re-
asserted until the XMTFS has
been read.
device
and
is
will
ready
not
be
to
Related parts for AM79C940KCW
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![AMD-751AC](/images/manufacturer_photos/0/0/14/advanced_micro_devices_tmb.jpg)
Part Number:
Description:
AMD-751ACAMD-751-TM System Controller Revision Guide
Manufacturer:
Advanced Micro Devices
Datasheet:
![AMD-751](/images/manufacturer_photos/0/0/14/advanced_micro_devices_tmb.jpg)
Part Number:
Description:
AMD-751AMD-751-TM System Controller Revision Guide
Manufacturer:
Advanced Micro Devices
Datasheet:
![AMD-X5-133SFZ](/images/manufacturer_photos/0/0/14/advanced_micro_devices_tmb.jpg)
Part Number:
Description:
AMD-X5-133SFZAm5X86? Microprocessor Family
Manufacturer:
Advanced Micro Devices
Datasheet:
![AMD-8131BLC](/images/manufacturer_photos/0/0/14/advanced_micro_devices_tmb.jpg)
Part Number:
Description:
Hyper Transport PCI-X Tunnel
Manufacturer:
Advanced Micro Devices
Datasheet:
![AMD-8111AC](/images/manufacturer_photos/0/0/14/advanced_micro_devices_tmb.jpg)
Part Number:
Description:
HyperTransport I/O Hub
Manufacturer:
Advanced Micro Devices
Datasheet:
![AMD-640AC](/images/manufacturer_photos/0/0/14/advanced_micro_devices_tmb.jpg)
Part Number:
Description:
System Controller
Manufacturer:
Advanced Micro Devices
Datasheet:
![AMD-K6](/images/no-image3.png)
Part Number:
Description:
AMD-K6 Processor
Manufacturer:
AMD [Advanced Micro Devices]
Datasheet:
![AMD-K6-2E/400AFR](/images/no-image3.png)
Part Number:
Description:
AMD-K6™-2E Embedded Processor
Manufacturer:
AMD [Advanced Micro Devices]
Datasheet:
![AMD-8132BLCT](/images/manufacturer_photos/0/0/44/amd__advanced_micro_devices__tmb.jpg)
Part Number:
Description:
Manufacturer:
AMD (ADVANCED MICRO DEVICES)
Datasheet:
![AMD-K6-IIIE+550ACR](/images/manufacturer_photos/0/0/44/amd__advanced_micro_devices__tmb.jpg)
Part Number:
Description:
Manufacturer:
AMD (ADVANCED MICRO DEVICES)
Datasheet:
![AMD-766AC](/images/no-image3.png)
Part Number:
Description:
Peripheral Bus Controller
Manufacturer:
AMD [Advanced Micro Devices]
Datasheet: