HD6433045 HITACHI [Hitachi Semiconductor], HD6433045 Datasheet - Page 456

• Manufacturer Part Number: HD6433045
• Description: Hitachi Single-Chip Microcomputer
• Manufacturer: HITACHI [Hitachi Semiconductor]

Bit 4—Parity Mode (O/E): Selects even or odd parity. The
asynchronous mode when the PE bit is set to 1 to enable the adding and checking of a parity bit.
The O/E setting is ignored in synchronous mode, or when parity adding and checking is disabled
in asynchronous mode.
Bit 4
O/E
0
1
Notes: 1. When even parity is selected, the parity bit added to transmit data makes an even
Bit 3—Stop Bit Length (STOP): Selects one or two stop bits in asynchronous mode. This setting
is used only in asynchronous mode. In synchronous mode no stop bit is added, so the STOP bit
setting is ignored.
Bit 3
STOP
0
1
Notes: 1. One stop bit (with value 1) is added at the end of each transmitted character.
In receiving, only the first stop bit is checked, regardless of the STOP bit setting. If the second
stop bit is 1 it is treated as a stop bit. If the second stop bit is 0 it is treated as the start bit of the
next incoming character.
2. When odd parity is selected, the parity bit added to transmit data makes an odd number
2. Two stop bits (with value 1) are added at the end of each transmitted character.
Description
Even parity
Odd parity
Description
One stop bit
Two stop bits
number of 1s in the transmitted character and parity bit combined. Receive data must
have an even number of 1s in the received character and parity bit combined.
of 1s in the transmitted character and parity bit combined. Receive data must have an
odd number of 1s in the received character and parity bit combined.
*2
*1
*1
*2
445
O/E bit setting is valid in
(Initial value)
(Initial value)