cxd2589q Sony Electronics, cxd2589q Datasheet - Page 47

no-image

cxd2589q

Manufacturer Part Number
cxd2589q
Description
Cd Digital Signal Processor
Manufacturer
Sony Electronics
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
CXD2589Q
Manufacturer:
SONY
Quantity:
775
Part Number:
CXD2589Q
Manufacturer:
SONY
Quantity:
1 020
Part Number:
CXD2589Q
Manufacturer:
SONY/索尼
Quantity:
20 000
(b) Track Jump
• 1-track jump
• 10-track jump
• 2N-track jump
• N-track move
1, 10, and 2N-track jumps are performed respectively. Always use this when the focus, tracking, and sled
servos are on. Note that tracking gain-up and braking-on should be sent beforehand because they are not
involved in this sequence.
Command for SSP
When $48 ($49 for REV) is received from the CPU, a FWD (REV) 1-track jump is performed in accordance
with Fig. 4-4. Set blind A and brake B with register 5.
When $4A ($4B for REV) is received from the CPU, a FWD (REV) 10-track jump is performed in
accordance with Fig. 4-5. The principal difference from the 1-track jump is to kick the sled. In addition, after
kicking the actuator, when 5 tracks have been counted through CNIN, the brake is applied to the actuator.
Then, when the actuator speed is found to have slowed up enough (determined by the CNIN cycle
becoming longer than the overflow C set with register 5), the tracking and sled servos are turned on.
When $4C ($4D for REV) is received from the CPU, a FWD (REV) 2N-track jump is performed in
accordance with Fig. 4-6. The track jump count N is set with register 7. Although N can be set to 216 tracks,
note that the setting is actually limited by the actuator. CNIN is used for counting the number of jumps.
Although the 2N-track jump basically follows the same sequence as the 10-track jump, the one difference is
that after the tracking servo is turned on, the sled continues to move only for "D", set with register 6.
When $4E ($4F for REV) is received from the CPU, a FWD (REV) N-track move is performed in
accordance with Fig. 4-7. N can be set to 216 tracks. CNIN is used for counting the number of jumps. This
N-track move is executed only by moving the sled, and is therefore suited for moving across several
thousand to several ten-thousand tracks.
SEIN (FZC)
BUSY
FOK
XLT
$47latch
$03
Fig. 4-3-(b). Auto Focus Timing Chart
– 47 –
Blind E
$08
CXD2589Q

Related parts for cxd2589q