zl50408 Zarlink Semiconductor, zl50408 Datasheet - Page 84

• Manufacturer Part Number: zl50408
• Description: Managed 8-port 10/100m 1-port 10/100/1000m Ethernet Switch
• Manufacturer: Zarlink Semiconductor

The default setting of AGETIME_LOW/HIGH provides 300 seconds aging time. Aging time is based on the
following equation:
{AGETIME_HIGH,AGETIME_LOW} X (# of MAC entries in the memory X 800 µsec). Number of MAC entries = 4 K.
13.3.5.3
CPU Address:h403
Accessed by CPU (R/W)
Note: ECR2[2] enable/disable learning for each port.
Bit [0]:
Bit [1]:
Bit [2]:
Bit [3]:
Bit [4]:
Bit [5]
Bit [6]:
Bit [7]:
SE_OPMODE – Search Engine Operation Mode
Reserved. Must be 0.
Protocol filtering mode
0 – Inclusive (Default)
1 – Exclusive
Report control
1 – Disable report MAC address deletion
0 – Report MAC address deletion (MAC address is deleted from MCT after
aging time) (Default)
Delete Control
1 – Disable aging logic from removing MAC during aging
0 – MAC address entry is removed when it is old enough to be aged (Default)
However, a report is still sent to the CPU in both cases, when bit [2] = 0
Enable RSVP Packet trapping
1- Enable RSVP Packet trapping. IP Multicast also needs to be enabled for
this function.
0- Disable RSVP Packet trapping. (Default)
1 - Report ARP packet to CPU
0 - No ARP packet reporting (Default)
Disable MCT speed-up aging
1 – Disable speed-up aging when MCT resource is low.
0 – Enable speed-up aging when MCT resource is low. (Default)
Slow Learning
1– Enable slow learning. Learning is temporary disabled when search
demand is high
0 – Learning is performed independent of search demand (Default)
Zarlink Semiconductor Inc.
ZL50408
84
Data Sheet