s5u1c88104d Epson Electronics America, Inc., s5u1c88104d Datasheet - Page 39

• Manufacturer Part Number: s5u1c88104d
• Description: Cmos 8-bit Single Chip Microcomputer
• Manufacturer: Epson Electronics America, Inc.

3.4 Self-diagnostic Program (t88104)
3.4.1 Outline of t88104
t88104 is a self-diagnostic program to check the
operation of the hardware tool ICE that is used for
program debugging of the S1C88 Family.
Perform a self-diagnostic of the ICE and Peripheral
Circuit Board periodically using this program
when using the ICE and the Peripheral Circuit
Board for debugging.
3.4.2 File configuration
(1) Program data HEX file (t88104.psa)
(2) Function option HEX file (t88104.fsa)
(3) Function option document file (t88104.fdc)
S5U1C88104D MANUAL
(DEVELOPMENT SOFTWARE TOOL FOR S1C88104)
Check using the VDC0–2, OSCC, LCDC, CMP0ON, CMP1ON, SVDON and HVLD LEDs on the Peripheral Circuit
Board. If the below light statuses are verified following system reset, it is normal. The cycle count indicates a 1 second
interval and the light status of the below LED changes every second. When it returns to 1 after 20, it then repeats the cycle
again.
Note: HVLD shows that the LED lights after blinking.
This is the main unit of the self-diagnostic
program generated by the fil88104 and in which
FFH is filled in the unused area of the internal
ROM and the system code is set to the system
reserved area of the S1C88104.
This is the file generated by the fog88104 to set
the mask option into the ICE and the Peripheral
Circuit Board, and is used at self-diagnosis.
This is the document file generated by the
fog88104 and the setting contents of the func-
tion option HEX file mentioned above are
described.
Cycle count
VDC0
VDC1
VDC2
OSCC
LCDC
CMP0ON
CMP1ON
SVDON
HVLD
Diagnostic procedure
1
2
3
4
5
6
7
3 DETAILED EXPLANATION OF TOOLS (Mask Data Checker mdc88104)
8
9 10 11 12 13 14 15 16 17 18 19 20 1
EPSON
3.4.3 Operation procedure
After installing the Peripheral Circuit Board into
the ICE, self-diagnosis of the ICE and the
Peripheral Circuit Board can be done by the
following operating test.
For the following operating test, the self-diagnostic
program (t88104.psa) and the function option HEX
data (t88104.fsa) in this package are used.
Perform the below operations with the ICE.
Execute by reading the self-diagnostic program
(t88104.psa) and the function option HEX data
(t88104.fsa) into the ICE.
Please refer the ICE help file for loading, execution.
Operation Check on ICE
2
: Brinking
: ON (lit)
: OFF (not lit)
33