s5u1c88104d Epson Electronics America, Inc., s5u1c88104d Datasheet - Page 28

• Manufacturer Part Number: s5u1c88104d
• Description: Cmos 8-bit Single Chip Microcomputer
• Manufacturer: Epson Electronics America, Inc.

3 DETAILED EXPLANATION OF TOOLS (Function Option Generator fog88104)
3.2.8 HEX file generation
When function options setting is completed, the
following message is output to ask the operator
whether to generate the function option HEX file.
DO YOU MAKE HEX FILE (Y/N) ?
Enter "Y" to generate the HEX file (c8104xxx.fsa). If
"N" is entered, no HEX file is generated and only
document file (c8104xxx.fdc) is generated.
Since the function option HEX file (c8104xxx.fsa) is
needed when debugging the program with the
ICE, normally set "Y".
When debugging with the ICE, download the
generated HEX file into the ICE.
When the above operation is completed, fog88104
generates the function option HEX file and func-
tion option document file. And then the following
message is output and the sequence returns to the
operation selection menu. However, when "N" is
input in the above selection for the function option
HEX file, the end message shown below is not
displayed.
3.2.10 Error message
Here following is a list of the fog88104 error messages.
22
ILLEGAL CHARACTER!!
FUNCTION OPTION DOCUMENT FILE IS NOT FOUND.
FILE NAME ERROR
BAD FUNCTION OPTION DOCUMENT FILE. - file name -
END OF OPTION SETTING.
DO YOU MAKE HEX FILE (Y/N) ? y
MAKING FILE(S) IS COMPLETED.
Error message
Table 3.2.10.1 fog88104 error message list
EPSON
3.2.9 End procedure
When a series of operations are complete, the
sequence returns to the operation selection menu.
Execution of fog88104 can be ended by selecting "3.
RETURN TO DOS" on this menu. If "1. INPUT
NEW FILE" or "2. EDIT FILE" is selected, setting
function options can be performed again.
fog88104 can be forcibly terminated by pressing the
"CTRL" and "C" keys together during program
execution. (It is possible by pressing "STOP" key
depending on the PC used.) However, in this case,
the correct function option HEX file and function
option document file are not generated.
*** OPERATION SELECT MENU ***
PLEASE SELECT NO.? 3
There is an input character error.
An input disable character has been input.
There is no document file at the time of the setting modifica-
tion (EDIT FILE).
There is no document file with the input file name at the time
of the setting modification (EDIT FILE).
9 characters or more have been input for the file name input.
A function option document file other than for the S1C88104
is specified during modification (EDIT FILE).
(DEVELOPMENT SOFTWARE TOOL FOR S1C88104)
1. INPUT NEW FILE
2. EDIT FILE
3. RETURN TO DOS
Explanation
S5U1C88104D MANUAL