msm7654 Oki Semiconductor, msm7654 Datasheet - Page 12

• Manufacturer Part Number: msm7654
• Description: Ntsc/pal Digital Video Encoder
• Manufacturer: Oki Semiconductor

¡ Semiconductor
BLOCK FUNCTIONAL DESCRIPTION
• Prologue Block
• Y Limiter Block
• C Limiter Block
• Y Level Converter Block
• U Level Converter Block
• V Level Converter Block
• RGB YUV Level Converter Block
• YUV Color Generator Block
This block separates input data at the ITU-R BT.656 format into a luminance signal (Y) and a
chrominance signal (Cb & Cr), and also generates information concerning sync signals
HSYNC_L, VSYNC_L, and BLANK_L.
This block separates input data at the 27 MHz YCbCr (8-bit input) format into a luminance
signal (Y) and a chrominance signal (Cb & Cr).
This block separates input data at the 13.5 MHz YCbCr (16-bit input) format into a chrominance
signal Cb and a chrominance signal Cr.
Of the processed input data, luminance and chrominance signals other than valid pixel data
are replaced by 8'h10 and 8'h80 respectively.
RGB signals are converted into luminance (Y) and chrominance (Cb & Cr) signals.
This block limits the luminance input signal by clipping the lower limit of an input signal
outside the ITU-R BT.601 Standard
• Signals are limited to YD = 16 when YD < 16.
• Signals are limited to YD = 254 when YD (input during a valid pixel period) = 255.
In other cases, signals are fed as is to next processing.
This block limits the chrominance signal by clipping the upper and lower limits of the input
signal outside the ITU-R BT.601 Standard.
CD = 1 when CD = 0 is input during a valid pixel period.
CD = 254 when CD = 255 is input during a valid pixel period.
Converts ITU-R BT.601 standard luminance signal level to DAC digital input level.
Converts ITU-R BT.601 standard chrominance signal level to DAC digital input level.
Converts ITU-R BT.601 standard chrominance signal level to DAC digital input level.
Converts RGB signals to YUV signals at a DAC digital input level.
This block generates luminance and chrominance signals from overlay color signals OLR, OLG
and OLB. The control signal (register CR0[3:1]) controls the output content and output level.
The output content of overlay or color bar is selected with register CR0[3] and the output level
of 100%, 75%, 50%, or 25% is selected with register CR0[2:1].
MSM7654
12