at88rf1354 ATMEL Corporation, at88rf1354 Datasheet - Page 13

• Manufacturer Part Number: at88rf1354
• Description: 13.56 Mhz Type B Rf Reader Specification
• Manufacturer: ATMEL Corporation

6.5.
6.6.
8547A−RFID−10/08
6.4.5.
C5 bypass capacitor pin. Bypass capacitance of 0.33 uF for the digital circuits must be connected between the C5 pin
and V
dielectric and a working voltage of 10 volts minimum may be used.
6.4.6.
C7 bypass capacitor pin. Bypass capacitance of 47 nF for the analog circuits must be connected between the C7 pin
and V
dielectric and a working voltage of 10 volts minimum may be used.
6.4.7.
Crystal pin 1. A 13.56 MHz crystal must be connected between Xtal1 and Xtal2.
6.4.8.
Crystal pin 2. A 13.56 MHz crystal must be connected between Xtal1 and Xtal2.
Test Pin Descriptions
6.5.1.
Test input pin 1. This pin must be connected to V
6.5.2.
Test input pin 2. This pin must be connected to V
6.5.3.
Test input pin 3. This pin must be connected to V
6.5.4.
Test output pin D. This test output must be left open by the user.
6.5.5.
Test output pin R. This test output must be left open by the user.
6.5.6.
Test pin Rmod. This pin must be connected to V
Other Pins
6.6.1.
No Connect pins. These package pins are not used and can be left open by the user.
SS
SS
. This capacitor must be placed within 3 mm of the package. Any 0.33 uF ceramic capacitor with X5R or X7R
A. This capacitor must be placed within 3 mm of the package. Any 47 nF ceramic capacitor with X5R or X7R
C5 [6]
C7 [29]
Xtal1 [4]
Xtal2 [5]
Test1 [7]
Test2 [16]
Test3 [17]
TestD [11]
TestR [31]
Rmod [34]
N.C. [18, 28, 30, 33, 36]
SS
SS
SS
SS
_Ant on the board.
on the board to prevent the IC from entering test mode.
on the board to prevent the IC from entering test mode.
on the board to prevent the IC from entering test mode.
13.56 MHz Type B RF Reader
13