w83627hf-pw Winbond Electronics Corp America, w83627hf-pw Datasheet - Page 108

• Manufacturer Part Number: w83627hf-pw
• Description: W83627hf/f W83627hg/g Winbond Lpc I/o
• Manufacturer: Winbond Electronics Corp America

CRE5 （Default 0x00）
CRE6 （Default 0x00）
CRE7 （Default 0x00）
6 - 0
5 - 0
BIT
BIT
BIT
7
7
6
7
6
5
4
3
2
1
0
Reserved
Compared Code Length. When the compared codes are storaged in the data register,
these data length should be written to this register.
Reserved
Chassis Status Clear.（availibale for A Version only）
1： Clear CASEOPEN#（Pin 76）event.
0： Disable clear function.
Set this bit to “1” will make hardware monitor register index 42, bit 4 cleared unceas-
ingly. Therefore, next Case-open Event can not be triggered again until this bit Is
cleared to “0”. This bit is available for W83627HF A Version only, please refer to Hard-
ware Monitor Register Index 46, bit 7 for other version.
CIR Baud Rate Divisor. The clock base of CIR is 32khz, so that the baud rate is 32khz
divided by（ CIR Baud Rate Divisor + 1）.
Reaerved.
Reserved.
Reserved.
Reserved.
SELWDTORST. Watch Dog Timer Reset Control.
Reset CIR Power-On function. After using CIR power-on, the software should write
logical 1 to restart CIR power-on function.
Invert RX Data.
1： Inverting RX Data.
0： Not inverting RX Data.
Enable Demodulation.
1： Enable received signal to demodulate.
0： Disable received signal to demodulate.
0： Indicates that Watch Dog Timer is reset by LPC_RST.
1： Indicates that Watch Dog Timer is reset by PWR_OK.
- 104 -
DESCRIPTION
DESCRIPTION
DESCRIPTION
W83627HF/ F/ HG/ G