mpc8241tzq266c Freescale Semiconductor, Inc, mpc8241tzq266c Datasheet - Page 56

no-image

mpc8241tzq266c

Manufacturer Part Number
mpc8241tzq266c
Description
Mpc8241 Integrated Processor Hardware Specifications
Manufacturer
Freescale Semiconductor, Inc
Datasheet
Document Revision History
56
Revision
4
3
2
Date
Section 1.4.1.2—Table 2: Changed note 1. Figure 2: Updated note 2 and removed ‘voltage regulator
delay’ label since Section 1.7.2 is being deleted this revision. Also, updated Table 5, note 1 to reflect
deletion of Section 1.7.2.
Section 1.4.1.3—Table 3: Updated the maximum input capacitance from 15 to 16 pF based on
characterization data.
Section 1.4.3.1—Updated PCI_SYNC_IN jitter specifications to 200 ps.
Section 1.4.3.3—Table 11, item 12b: added the word ‘address’ to help clarify which signals the spec
applies to. Figure 15: edited timing for items 12a0 and 12a2 to correspond with Table 11.
Section 1.5.2—Changed some dimension values for the side view of package.
Section 1.5.3—Updated notes for the QACK/DA0 signal because this signal has been found to have
no internal pull resistor.
Section 1.6—Updated note numbering list for Table 19. Removed mode 5 from PLL tables since that
mode is no longer supported.
Section 1.7.2 —This section was removed as it was not necessary since the power information is
covered in Section 1.4.1.5.
Section 1.7.4—Added the words ‘the clamping voltage’ to describe LV
Changed the QACK/DA0 signal from the list of signals having an internal pull-up resistor to the list
of signals needing a weak pull-up resistor to OV
Section 1.9.1—Table 21: Added processor version register value column.
Section 1.4.1.2—Changed recommended value in Table 2 for I/O buffer supply to 3.3
Changed wording referencing Figure 4 to refer to the MPC8241.
Section 1.4.2—Table 6: Updated values for thermal characterization data as per the new packaging
and 266-MHz part. Added note 7 for the difference between the 166-/200-MHz and the 266-MHz
packaging.
Section 1.4.3—Corrected the voltage listing for the 266-MHz part to 1.8
Section 1.5—Changed package parameters and illustration based on new packaging.
Section 1.6—Table 18: Modified PLL configuration for 166- and 200-MHz parts for mode 7 to specify
that this mode is not available for Rev. D of the part. Added sentence to note 1 referencing update
for mode 7. Table 19: Made several range updates for various modes to accommodate VCO limits.
Added mode 7 and 1E updates for Rev. D. Updated VCO limits listed in notes 4, 6, and 7.
Section 1.4.1.2—Updated note 1 to include 266-MHz part. Added a line to cautions 2 and 3 in the
notes section of Table 2. Added Figures 4 and 5 to show the overshoot and undershoot requirements
for the PCI interface.
Section 1.4.1.3—Table 3: Updated minimum value for input high voltage, and maximum value for
capacitance.
Section 1.4.3.2—Appended Figures 9 and 10.
Section 1.4.3.4—Added a column to Table 13 to include 133-MHz memory bus speed for 266-MHz
part.
Section 1.5.2—Changed Figure 24 to accommodate new package offerings.
Section 1.6—Added Table 19 for PLL of the 266-MHz part.
Section 1.7.7—Corrected note numbering in COP connector diagram.
Section 1.9.1—Updated package description in part marking nomenclature.
MPC8241 Integrated Processor Hardware Specifications, Rev. 10
Table 21. Revision History Table (continued)
Substantive Change(s)
DD
.
DD
±
in the sixth paragraph.
Freescale Semiconductor
0.1 V in Table 7.
±
0.3 V.

Related parts for mpc8241tzq266c