pca82c200t NXP Semiconductors, pca82c200t Datasheet - Page 12

• Manufacturer Part Number: pca82c200t
• Description: 8-bit Microcontroller With On-chip Can
• Manufacturer: NXP Semiconductors

Philips Semiconductors
7.1
The Program Memory of the P8xCE598 consists of 32 kbytes ROM on-chip, externally expandible up to 64 kbytes.
Table 3 Instruction fetch controlled by EA
Notes
1. This implementation prevents reading of the internal program code by switching from external Program Memory
2. By setting a security bit the internal Program Memory content is protected, which means it cannot be read out.
7.2
The internal Data Memory is physically built-up and accessible as shown in Table 4 (see Fig.5).
Table 4 Internal Data Memory size and address mode
Notes
1. MAIN RAM can be addressed directly and indirectly as in the 80C51.
2. AUXILIARY RAM (0 to 255):
3. SFRs = Special Function Registers.
1996 Jun 27
MAIN RAM
(note 1)
AUXILIARY RAM
(note 2)
SFRs (note 3)
DURING RESET
DATA MEMORY
LATCHED TO:
8-bit microcontroller with on-chip CAN
during a MOVC instruction.
If the security bit has been set to LOW there are no restrictions for the MOVC instruction.
a) Is indirectly addressable in the same way as the external Data Memory with MOVX instructions.
b) Access will not affect the ports P0, P2, P3.6 and P3.7 during internal program execution.
INTERNAL
Program Memory
Internal Data Memory
H
H
L
PIN EA (note 1)
AFTER RESET
256 bytes
256 bytes
128 bytes
‘don’t care’
SIZE
0 to 127
128 to 255
0 to 255
128 to 255
LOCATION
internal Program Memory (note 2)
external Program Memory
INSTRUCTIONS FETCHED FROM:
DIRECT
ADDRESS MODE
X
X
12
INDIRECT
X
X
X
Address pointers are R0 and R1 of the
selected register bank.
Address pointers are R0 and R1 of the
selected register bank and the DPTR.
POINTERS
0000H
8000H
0000H
Product specification
P8xCE598
LOCATION
ADDRESS
7FFFH
FFFFH
FFFFH