s29gl01gs Meet Spansion Inc., s29gl01gs Datasheet - Page 57

• Manufacturer Part Number: s29gl01gs
• Manufacturer: Meet Spansion Inc.

March 21, 2011 S29GL_128S_01GS_00_02
ID-CFI Location 02h displays sector protection status for the sector selected by the sector address (SA) used
in the ID-CFI enter command. To read the protection status of more than one sector it is necessary to exit the
ID ASO and enter the ID ASO using the new SA. The access time to read location 02h is always t
read of this location requires CE# to go High before the read and return Low to initiate the read
(asynchronous read access). Page mode read between location 02h and other ID locations is not supported.
Page mode read between ID locations other than 02h is supported.
For additional information see
Lower Software Bits
Upper Software Bits
Manufacture ID
Indicator Bits
Description
Verification
Protection
Device ID
Device ID
Device ID
RFU
D a t a
(SA) + 0000h
(SA) + 0001h
(SA) + 0002h
(SA) + 0003h
(SA) + 0004h
(SA) + 0005h
(SA) + 0006h
(SA) + 0007h
(SA) + 0008h
(SA) + 0009h
(SA) + 000Ah
(SA) + 000Bh
(SA) + 000Ch
(SA) + 000Dh
(SA) + 000Eh
(SA) + 000Fh
S h e e t
Address
ID-CFI ASO on page
Table 6.2 ID (Autoselect) Address Map
GL-S MirrorBit
( P r e l i m i n a r y )
0001h
227Eh
Sector Protection State (1= Sector protected, 0= Sector unprotected). This protection state
is shown only for the SA selected when entering ID-CFI ASO. Reading other SA provides
undefined data. To read a different SA protection state ASO exit command must be used
and then enter ID-CFI ASO again with the new SA.
DQ15-DQ08 = 1 (Reserved)
DQ7 - Factory Locked Secure Silicon Region
DQ6 - Customer Locked Secure Silicon Region
DQ5 = 1 (Reserved)
DQ4 - WP# Protects
DQ3 - DQ0 = 1 (Reserved)
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Bit 0 - Status Register Support
Bit 1 - DQ polling Support
Bit 3-2 - Command Set Support
Bits 4-15 - Reserved = 0
Reserved
2228h = 1 Gb
2223h = 512 Mb
2222h = 256 Mb
2221h = 128 Mb
2201h
1 = Locked,
0 = Not Locked
1 = Locked
0 = Not Locked
0 = lowest address Sector
1 = highest address Sector
1 = Status Register Supported
0 = Status Register not supported
1 = DQ bits polling supported
0 = DQ bits polling not supported
11 = reserved
10 = reserved
01 = Reduced Command Set
00 = Classic Command set
®
Family
33.
Read Data
ACC
and a
57