bsv-1.5s12r0h XP Power Limited, bsv-1.5s12r0h Datasheet - Page 52

• Manufacturer Part Number: bsv-1.5s12r0h
• Description: Pol Dc-dc Converter
• Manufacturer: XP Power Limited

13. Cleaning conditions
14. Precautions
15. Warranty
16. If you have any further technical questions for this product,
The product can not be washed as a whole. Non-scrub flux is recommended.
For the safety of our customer, please follow all warnings and specifications stated below.
- This product is intended for use in general electronic appliances (office work machines,
- Parallel and serial operations are not possible.
- Refrain from using connectors and sockets when mounting the product. The performance may not
- Though over current and short circuit protections are built in, long time use in short circuit should be
- The product may be damaged if used in environments where the electric and temp characteristics
- Do not store this product where corrodible gases and dusts may generate.
- There is a possibility that the product may be damaged from static electricity. The workers should
- This product does not have a fuse built in. When the converter is in an abnormal state, please
- The product does not have an over voltage protection circuit built in. When large amount of voltage
- No test certificate is attached to the product.
The period of warranty for this product is 1 year. During this time, if any defects occur in which our
company’s design or production is to blame we will either fix the product or trade with a new one free
of charge. However, this warranty is voided if the product has been internally modified or adjusted.
The warranty covers only the stated products in this datasheet.
Please contact us:
E-mail:
http://www.bellnix.com
telecommunication equipment and measurement equipment). Do not use for medical equipment,
nuclear power equipment and trains, etc. where the malfunction and damage of this product may
directly cause harm to human life and/or property. Confirmation is recommended when using in other
than general electronic equipment.
be fulfilled by the effect of contacting resistors. Make sure to mount onto the PCB by soldering.
avoided since it may cause failure to the product.
are out of specification.
discharge all static electricity before handling the product and the work atmosphere should also have
a static countermeasure.
connect a fuse into +input line as a protection of over current. The electrical supply source should
have enough capacity to be able to shut down a fuse.
occur inside the module, there is a mode in which it is directly released from the output and may
cause smoke or fire. Therefore, an over voltage protection circuit should always be added.
DC-DC Converter
[e-mail]
Small Type High-Speed Response POL DC-DC Converter
BSV-nano Series
BDD20100416
13