bsv-1.5s12r0h XP Power Limited, bsv-1.5s12r0h Datasheet - Page 39

• Manufacturer Part Number: bsv-1.5s12r0h
• Description: Pol Dc-dc Converter
• Manufacturer: XP Power Limited

12. Vibration and shock test
13. Cleaning Conditions
14. Precautions
15. Guarantee
16. Miscellaneous
17.If you have any further technical questions for this product, please contact us.
HIGH SPEED LOAD RESPONSE, OUTPUT VOLTAGE SETTING ACCURACY±1% POL DC-DC Converter
Vibration : 5-10 Hz All amplitudes 10mm, 10-55Hz Acceleration 2G (Three direction, for one hour each)
Shock : Acceleration 20G (Three direction, three times each)
Shocking time 11±5ms
This product can not be washed whole. No-clean solder paste is recommended for this product.
For customer’s safety, when using this product, please refer to the specification and please use keeping the
following precautions surely.
-This product is for being used in general electric equipments (business equipments, telecommunication
equipments and measurement equipment).
Can not be used in medical equipments, nuclear equipments and trains which would affect lives or properties directly by the
failure of this product.
Be sure to contact our sales when using in besides general use.
- For this product parallel and series operation are not possible.
- For mounting this product, please do not use connector of socket. The performance may not be fulfilled due to the effect
of contacting resistor.
Mount to print board by soldering.
- This product has a built-in over-current, short protection, but long time short circuit will cause failure, so please avoid it.
- There is possibility of damage when used under electric conditions and environmental conditions such as temperature that
are out of the standards.
Be sure to be use within the standards.
- Do not store in a place where corrodible gas may be generated or a dusty place.
- There is possibility of damage by static. When the worker has electrified static, electrical discharge should be done and
the working on the table so grounded may be recommended.
- This product does not have a built-in fuse. Connect a fuse to the +input line for protection when over-current flows into
input at abnormal. Please be sure that the supplying power has the capacity to fuse the fuse.
- This product does not have a built-in over-voltage protection. When over-voltage occurs due to the abnormality in the
module, there is a mode that input voltage comes out at it is, and may cause smoke and ignition. To prevent this, be sure
to add over-voltage protection.
- No test result certificate attached to this product.
The guaranteed term of this product is one year. When occurring any failure mode by the cause of our design and
production in this guaranteed term, we will repair the failure product or replace to the good product by free of charge.
However, when being remodeled inside etc., we shall not guarantee it.
The range of the guarantee for this product is the one of this products concerned.
Any doubtful point arising in connection with the interpretation of any provision hereof shall be decided on by mutual
agreement between the parties hereto.
E-mail :
URL :
http://www.bellnix.com
DC-DC Converter
[e-mail]
BSV-HE Series
BDD20090116
11