ds265188-port-t1-e1-j1-transc Maxim Integrated Products, Inc., ds265188-port-t1-e1-j1-transc Datasheet - Page 167

• Manufacturer Part Number: ds265188-port-t1-e1-j1-transc
• Description: Ds26518 8-port T1/e1/j1 Transceiver
• Manufacturer: Maxim Integrated Products, Inc.

Register Name:
Register Description:
Register Address:
Bit #
Name
Default
Note: This register has an alternate definition for E1 mode. See RCR1.
Bit 7: Sync Time (SYNCT)
Bit 6: Receive B8ZS Enable (RB8ZS)
Bit 5: Receive Frame Mode Select (RFM)
Bit 4: Auto Resync Criteria (ARC)
Bit 3: Sync Criteria (SYNCC)
Bit 2: Receive Japanese CRC-6 Enable (RJC)
Bit 1: Sync Enable (SYNCE)
Bit 0: Resynchronize (RESYNC). When toggled from low to high, a resynchronization of the receive-side framer is
initiated. Must be cleared and set again for a subsequent resync.
0 = Qualify 10 bits.
1 = Qualify 24 bits.
0 = B8ZS disabled.
1 = B8ZS enabled.
0 = ESF framing mode.
1 = D4 framing mode.
0 = Resync on OOF or LOS event.
1 = Resync on OOF only.
In D4 Framing Mode:
0 = Search for Ft pattern, then search for Fs pattern.
1 = Cross couple Ft and Fs pattern.
In ESF Framing Mode:
0 = Search for FPS pattern only.
1 = Search for FPS and verify with CRC-6.
0 = Use ANSI:AT&T:ITU-T CRC-6 calculation (normal operation).
1 = Use Japanese standard JT–G704 CRC-6 calculation.
0 = Auto resync enabled.
1 = Auto resync disabled.
SYNCT
7
0
RCR1 (T1 Mode)
Receive Control Register 1
081h + (200h x (n - 1)) : where n = 1 to 8
RB8ZS
6
0
RFM
5
0
167 of 313
ARC
4
0
SYNCC
3
0
DS26518 8-Port T1/E1/J1 Transceiver
RJC
2
0
SYNCE
1
0
RESYNC
0
0