MBM29DS163TE Fujitsu Media Devices, MBM29DS163TE Datasheet - Page 35

• Manufacturer Part Number: MBM29DS163TE
• Description: (MBM29DS163BE/TE) FLASH MEMORY CMOS 16 M (2 M X 8/1 M X 16) BIT
• Manufacturer: Fujitsu Media Devices

*1 : Minimum DC voltage on input or I/O pins is 0.5 V. During voltage transitions, input or I/O pins may
*2 : Minimum DC input voltage on A
*3 : Minimum DC input voltage on WP/ACC pin is
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
Note : Operating ranges define those limits between which the functionality of the device is guaranteed.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
Storage Temperature
Ambient Temperature with Power Applied
Voltage with Respect to Ground All pins except A
OE, and RESET *
Power Supply Voltage *
A
WP/ACC *
Ambient Temperature
Power Supply Voltage
9
, OE, and RESET *
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING CONDITIONS
undershoot V
V
to 20 ns.
undershoot V
and RESET pins may undershoot V
input and supply voltage (V
RESET pins is 11.5 V which may positive overshoot to 12.5 V for periods of up to 20 ns.
10.5 V which may positive overshoot to 12.0 V for periods of up to 20 ns when Vcc is applied.
CC
0.5 V. During voltage transitions, input or I/O pins may overshoot to V
3
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
Parameter
SS
SS
1
to 2.0 V for periods of up to 20 ns. Maximum DC voltage on input or I/O pins is
to 2.0 V for periods of up to 20 ns. Maximum DC input voltage on WP/ACC pin is
Parameter
2
1
IN
-V
9
CC
, OE and RESET pins is 0.5 V. During voltage transitions, A
) does not exceed 9.0 V.Maximum DC input voltage on A
SS
to 2.0 V for periods of up to 20 ns. Voltage difference between
Symbol
V
T
CC
9
A
,
0.5 V. During voltage transitions, WP/ACC pin may
V
Symbol
IN
Tstg
V
V
, V
V
T
ACC
CC
IN
A
OUT
Min
MBM29DS163TE/BE
1.8
40
Min
0.5
0.5
0.5
0.5
55
40
Ranges
CC
Rating
2.0 V for periods of up
Max
V
2.2
85
CC
Max
11.5
10.5
125
3.0
85
0.5
9
, OE and
9
, OE
Unit
°C
Unit
V
V
V
V
V
C
C
10
35