SB2A-16A Qlogic Corporation, SB2A-16A Datasheet - Page 67

• Manufacturer Part Number: SB2A-16A
• Description: Development Tools, SANbox 16-port Switch
• Manufacturer: Qlogic Corporation

4.3.3
Using FTP and the CLI to Install Firmware
59021-06 A
To install firmware using the CLI when the management workstation does not
have an FTP server, do the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Connect to the switch through the Ethernet or the serial port.
Move to the folder or directory that contains the new firmware image file.
Establish communications with the switch using the File Transfer Protocol
(FTP). Enter one of the following on the command line:
or
where xxx.xxx.xxx.xxx is the switch IP address, and switchname is the
switch name associated with the IP address.
Enter the following account name and password:
Activate binary mode and copy the firmware image file on the switch:
Close the FTP session.
Establish communications with the switch using the CLI. Enter one of the
following on the command line:
or
where xxx.xxx.xxx.xxx is the switch IP address, and switchname is the
switch name associated with the IP address.
A Telnet window opens prompting you for a login. Enter an account name
and password. The default account name and password are (admin,
password).
Open an Admin session to acquire the necessary authority.
>ftp xxx.xxx.xxx.xxx
>ftp switchname
user:images
password: images
ftp>bin
ftp>put filename
ftp>quit
telnet xxx.xxx.xxx.xxx
telnet switchname
SANbox2 $>admin start
Install Firmware
4 – Installation
4-19