LM3S1133 Luminary Micro, Inc, LM3S1133 Datasheet - Page 100

• Manufacturer Part Number: LM3S1133
• Description: Lm3s1133 Arm Microcontroller
• Manufacturer: Luminary Micro, Inc

System Control
100
Bit/Field
9:8
5:4
2:0
7
6
3
MAXADCSPD
reserved
reserved
reserved
Name
WDT
HIB
Type
R/W
R/W
R/W
RO
RO
RO
Reset
0
0
0
0
0
0
Preliminary
Description
ADC Sample Speed
This field sets the rate at which the ADC samples data. You cannot set
the rate higher than the maximum rate. You can set the sample rate by
setting the MAXADCSPD bit as follows:
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
HIB Clock Gating Control
This bit controls the clock gating for the Hibernation module. If set, the
unit receives a clock and functions. Otherwise, the unit is unclocked and
disabled.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
WDT Clock Gating Control
This bit controls the clock gating for the WDT module. If set, the unit
receives a clock and functions. Otherwise, the unit is unclocked and
disabled. If the unit is unclocked, a read or write to the unit generates
a bus fault.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Value
0x1
0x0
Description
250K samples/second
125K samples/second
July 26, 2008