DSP-A1092 ETC, DSP-A1092 Datasheet - Page 28

• Manufacturer Part Number: DSP-A1092
• Description: NATURAL SOUND AV AMPLIFIRE
• Manufacturer: ETC

26
CONNECTING THE MAIN SPEAKERS TO THIS UNIT
unit.
MAIN SPEAKERS A terminals, and connect another set to the B
terminals. If you use only one set of MAIN speakers, connect them
to either the MAIN SPEAKERS A or B terminals. Make sure that
the jumper bars between the PRE OUT and MAIN IN jacks on the
rear panel are in place.
power is desired. In this case, remove the jumper bars and
connect the PRE OUT jacks to the INPUT jacks of a stereo power
amplifier with a stereo pin cable—making sure to connect the left
and right channels correctly. Connect the MAIN speakers to the
speaker output terminals of the power amplifier.
front panel corresponding to the main speakers you will use to the
ON position. Set the switch for the main speakers you will not use
to the OFF position. Selected main speakers are shown by the
lighting of “SPEAKERS A” and/or “SPEAKERS B” on the display
panel.
One or two sets of MAIN speakers can be connected to this
If you use two sets of MAIN speakers, connect one set to the
It is also possible to use an external power amplifier if more
Set the SPEAKERS switch A or B (or both A and B) on the
Main speaker A
Main speaker B
Power amplifier
This unit
PRE OUT
INPUT
Main speaker A
Main speaker B