DSP-A1092 ETC, DSP-A1092 Datasheet - Page 14

• Manufacturer Part Number: DSP-A1092
• Description: NATURAL SOUND AV AMPLIFIRE
• Manufacturer: ETC

12
Speakers and Speaker Placement
the MAIN SPEAKERS (your normal stereo speakers), the FRONT
EFFECT SPEAKERS and the REAR SPEAKERS, plus the
CENTER SPEAKER. You may also be using a subwoofer.
and have enough power handling capacity to accept the maximum
output of your audio system.
SPEAKERS. For precise sound localization, however, it is ideal to
use high performance models that can reproduce sounds in full
range for the CENTER SPEAKER and the FRONT EFFECT and
REAR SPEAKERS.
MAIN SPEAKERS, on either side of and a few feet behind and
above the MAIN SPEAKER pair.
They should be nearly six feet up from the floor.
SPEAKERS. (To avoid interference, keep the speaker above or
below the television monitor, or use a magnetically shielded
speaker.)
Subwoofer System, the position of the speaker is not so critical
because low bass tones are not highly directional.
Your full seven-speaker system will require three speaker pairs:
The MAIN SPEAKERS should be high performance models
Other speakers do not have to be equal to the MAIN
Place the MAIN SPEAKERS in the normal position.
Place the FRONT EFFECT SPEAKERS further apart than the
Place the REAR SPEAKERS behind your listening position.
Place the CENTER SPEAKER precisely between the two MAIN
If using a SUBWOOFER, such as a Yamaha Active Servo
Subwoofer
Main speaker Front effect speaker
Rear speaker
Center speaker