SC26C94C1N Philips Semiconductors, SC26C94C1N Datasheet - Page 21

• Manufacturer Part Number: SC26C94C1N
• Description: Quad universal asynchronous receiver/transmitter QUART
• Manufacturer: Philips Semiconductors

Philips Semiconductors
Global Interrupt Byte Count (GIBC)
The GIBC is not an actual register but simply outputs the interrupting
UART’s transmit or receive byte counter value. The count, accurate
at the time IACKN asserts, is captured in the CIR. The high order 5
bits are read as ‘0’. The GIBC is read only at address 2AH.
Global RxFIFO (GRxFIFO)
If a receiver is not the cause of the current interrupt, a read of the
Global RxFIFO will yield a byte containing all ones and NONE of the
UART channels’ receive FIFOs will be popped. (IMPORTANT)
The GRxFIFO is Read only at address 2BH.
Global TxFIFO (GTxFIFO)
If a transmitter is not the cause of the current interrupt, a write to the
Global TxFIFO has no effect.
The GTxFIFO is Write only at address 2BH.
Global Interrupting Channel (GICR)
Like the other Global pseudo-registers no hardware register exists.
The Channel number field of the Current Interrupt Register padded
with leading zeros is output as the GICR. The GICR is Read only at
address 29H.
C/Tab indicated by Channel code B 01
C/Tcd indicated by Channel code D 11
Interrupt Control (ICR)
The Threshold Field is used by the interrupt comparator to
determine if a winning interrupt “bid” should result in interrupting the
host MPU. The threshold field resets to 00.
1995 May 1
Quad universal asynchronous receiver/transmitter (QUART)
00000
5
Threshold
000000
6
6
Data to be Sent
Received Data
8
8
# Bytes
3
Chan #
IVC
2
2
21
The IVC field controls what kind of vector the QUART returns to the
host MPU during an Interrupt Acknowledge cycle:
00
01
10
11
The IVC field reset to 00. The ICR is read/write at address 2CH.
Bidding Control Registers (BCRs)
This register is a transparent latch. It must be set to ensure the
expected operation of the arbitration system. The 3 MSBs
determine the priority of Received Break Interrupts; they are reset to
000.
Bits 4:2 determine the priority of Change of Input State interrupts,
and are reset to 00.
BCR Counter/Timer bits reset to 00.
There is one BCR per UART channel; they can be read or written at
addresses 20-23H.
Interrupt Vector (IVR)
Interrupt Vector (IVR-Modified)
Holds the constant bits of the interrupt acknowledge vector. As
shown, the three MSBs are always used, while the less significant
bits can be replaced by the interrupt type code and/or Channel code
bits contained in the CIR. The IVR is write only at address 29H.
Received Break
Always Used
Output contents of Interrupt Vector Register
Output 6 MSBs of IVR and Channel number as 2 LSBs
Output 3 MSBs of IVR, Interrupt Type and Channel number
Disable generation of vector during IACK cycle.
Returns hex’FF during an IACKN cycle.
3
3
The 8 bits of the interrupt vector
with IVC = 0x
State Change
3
3
Product specification
SC26C94
w/IVC = 01 or 10
2
C/T
2