WM8978_06 Wolfson Microelectronics Ltd., WM8978_06 Datasheet - Page 10
WM8978_06
Manufacturer Part Number
WM8978_06
Description
Stereo Codec With Speaker Driver
Manufacturer
Wolfson Microelectronics Ltd.
Datasheet
1.WM8978_06.pdf
(119 pages)
- Current page: 10 of 119
- Download datasheet (2Mb)
WM8978
TERMINOLOGY
1.
2.
3.
4.
5.
6.
7.
8.
9.
w
not apply to ramping down the gain when the signal is too loud, which happens without a delay.
with no signal applied. (No Auto-zero or Automute function is employed in achieving these results).
the other. Measured by applying a full scale signal to one channel input and measuring the level of signal apparent at
the other channel output.
SPKBOOST is set then SPKVDD should be 1.5xAVDD to prevent clipping taking place in the output stage (when
PGA gains are set to 0dB).
Input level to RIP and LIP is limited to a maximum of -3dB or THD+N performance will be reduced.
Note when BEEP path is not enabled then AUXL and AUXR have the same input impedances.
Hold Time is the length of time between a signal detected being too quiet and beginning to ramp up the gain. It does
Ramp-up and Ramp-Down times are defined as the time it takes for the PGA to sweep across 90% of its gain range.
All hold, ramp-up and ramp-down times scale proportionally with MCLK
Signal-to-noise ratio (dB) – SNR is a measure of the difference in level between the full scale output and the output
THD+N (dB) – THD+N is a ratio, of the rms values, of (Noise + Distortion)/Signal.
Channel Separation (dB) – Also known as Cross-Talk. This is a measure of the amount one channel is isolated from
The maximum output voltage can be limited by the speaker power supply.
If OUT3BOOST, OUT4BOOST or
PP Rev 3.0 May 2006
Pre-Production
10
Related parts for WM8978_06
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
The WM8978 is a low power, high quality stereo codec designed for portable applications such as Digital still camera or Digital Camcorde
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
Specifications: Manufacturer: Wolfson Microelectronics ; Product Category: ADC (A/D Converters) ; RoHS: Details ; Number of Converters: 1 ; Number of ADC Inputs: 1 ; Conversion Rate: 6 MSPs ; Resolution: 16 bit ; Input Type: Voltage ; Interface
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
WM8192 : 16-BIT, 6MSPS Cis/ccd Image Digitiser With Multiplexed Output
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
The WM8976 is a low power, high quality stereo codec designed for portable applications such as Digital still camera or Digital Camcorde
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
WM8141 : 12-BIT 6MSPS Cis/ccd Analogue Front End/digitiser
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
WM8143 : 10 or 12-BIT, 4MSPS Analogue Front End For CCD Image Sensors
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
WM8143 : 10 or 12-BIT, 4MSPS Analogue Front End For CCD Image Sensors
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
Integrated 10-bit Data Acquisition System For Imaging Applications
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
12-bit ( 8+4-bit ) Linear Sensor Image Processor
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
WM8148 : 12-BIT/12 MSPS Ccd/cis Analogue Front End/digitiser
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet: