MBM29DL640E Fujitsu Microelectronics, Inc., MBM29DL640E Datasheet - Page 38

• Manufacturer Part Number: MBM29DL640E
• Description: Flash Memory 64 M 8 M X 8/4 M X 16 Bit Dual Operation
• Manufacturer: Fujitsu Microelectronics, Inc.

38
MBM29DL640E
Notes : 1. Minimum DC voltage on input or I/O pins is 0.5 V. During voltage transitions, input or I/O pins may
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
Storage Temperature
Ambient Temperature with Power Applied
Voltage with Respect to Ground All pins except A
OE, and RESET (Note 1)
Power Supply Voltage (Note 1)
A
WP/ACC (Note 3)
Ambient Temperature
Power Supply Voltage
9
, OE, and RESET (Note 2)
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING RANGES
Operating ranges define those limits between which the proper device function is guaranteed.
2. Minimum DC input voltage on A
3. Minimum DC input voltage on WP/ACC pin is
Parameter
undershoot V
V
and supply voltage (V
pins is 13.0 V which may overshoot to 14.0 V for periods of up to 20 ns.
undershoot V
RESET pins may undershoot V
10.5 V which may overshoot to 12.0 V for periods of up to 20 ns when Vcc is applied.
CC
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
0.5 V. During voltage transitions, input or I/O pins may overshoot to V
Parameter
SS
SS
to 2.0 V for periods of up to 20 ns. Maximum DC voltage on input or I/O pins is
to 2.0 V for periods of up to 20 ns. Maximum DC input voltage on WP/ACC pin is
Symbol
V
Ta
IN
CC
80/90/12
- V
CC
MBM29DL640E 80
MBM29DL640E 90/12
MBM29DL640E 80
MBM29DL640E 90/12
) does not exceed 9.0 V. Maximum DC input voltage on A
9
SS
, OE and RESET pins is 0.5 V. During voltage transitions, A
to 2.0 V for periods of up to 20 ns. Voltage difference between input
9
,
Part No.
V
Symbol
IN
Tstg
V
V
V
Ta
, V
ACC
CC
IN
OUT
0.5 V. During voltage transitions, WP/ACC pin may
Min.
0.5
0.5
0.5
0.5
55
40
Rating
Min.
3.0
2.7
20
40
CC
Ranges
2.0 V for periods of up to 20 ns.
V
CC
Max.
13.0
10.5
125
4.0
85
0.5
Max.
3.6
3.6
70
85
9
, OE and RESET
9
, OE and
Unit
V
V
V
V
Unit
C
C
V
V
C
C