TMP86xy49UG/F/NG Toshiba, TMP86xy49UG/F/NG Datasheet - Page 61

• Manufacturer Part Number: TMP86xy49UG/F/NG
• Manufacturer: Toshiba

Specifications of TMP86xy49UG/F/NG

• Package: LQFP64/QFP64/SDIP64
• Rom Types (m=mask,p=otp,f=flash): M/P/F
• Rom Size: 16/32/60
• Ram Size: 512/1K/2K
• Driver Led: 13
• Driver Lcd: -
• Spi/sio Channels: 2
• Uart/sio Channels: 2
• I2c/sio Channels: 1
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 16
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 2
• Timer Counter 8-bit Channel: 4
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: -
• Number Of I/o Ports: 56
• Power Supply (v): 4.5 to 5.5

3.7 External Interrupts
External Interrupt Control Register
EINTCR
(0037H)
Note 1: fc: High-frequency clock [Hz], *: Don’t care
Note 2: When the system clock frequency is switched between high and low or when the external interrupt control register
Note 3: The maximum time from modifying INT1NC until a noise reject time is changed is 2
(EINTCR) is overwritten, the noise canceller may not operate normally. It is recommended that external interrupts are dis-
abled using the interrupt enable register (EIR).
INT1NC
7
INT1NC
INT0EN
INT3 ES
INT2 ES
INT1 ES
INT0EN
6
Noise reject time select
P00/
INT3 edge select
INT2 edge select
INT1 edge select
5
-
INT0
pin configuration
4
-
INT3ES
3
Page 44
0: Pulses of less than 63/fc [s] are eliminated as noise
1: Pulses of less than 15/fc [s] are eliminated as noise
0: P00 input/output port
1:
0: Rising edge
1: Falling edge
0: Rising edge
1: Falling edge
0: Rising edge
1: Falling edge
INT2ES
INT0
2
pin (Port P00 should be set to an input mode)
INT1ES
1
0
6
/fc.
(Initial value: 00** 000*)
TMP86PM49UG
R/W
R/W
R/W
R/W
R/W