TDA18254HN/C1,518 NXP Semiconductors, TDA18254HN/C1,518 Datasheet - Page 37

• Manufacturer Part Number: TDA18254HN/C1,518
• Description: IC CABLE TUNER DGTL 48HVQFN
• Manufacturer: NXP Semiconductors
• Type: Tunerr

Specifications of TDA18254HN/C1,518

• Mounting Type: Surface Mount
• Package / Case: 48-VQFN Exposed Pad, 48-HVQFN, 48-SQFN, 48-DHVQFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 935289589518

NXP Semiconductors
SC16C852V
Product data sheet
7.22 Advanced Feature Control Register 2 (AFCR2)
Table 34.
Bit
7:6
5
4
3
2
1
0
AFCR2[5]
AFCR2[4]
AFCR2[3]
AFCR2[2]
AFCR2[1]
AFCR2[0]
Symbol
AFCR2[7:6]
Advanced Feature Control Register 2 bits description
Dual UART with 128-byte FIFOs, IrDA, and XScale VLIO bus interface
All information provided in this document is subject to legal disclaimers.
RS485 RTS/DTR. Select RTSA/RTSB or DTRA/DTRB pin to control the
RXDisable. Disable receiver.
9-bitMode. Enable 9-bit mode or Multidrop (RS-485) mode.
Description
reserved
RTSInvert. Invert RTS or DTR signal in auto 9-bit mode.
RTSCon. Enable the transmitter to control RTS or DTR signal in auto 9-bit
mode.
external transceiver.
TXDisable. Disable transmitter.
Rev. 5 — 21 January 2011
0 = RTS or DTR is set to 0 by the UART during transmission, and to 1
during reception
1 = RTS or DTR is set to 1 by the UART during transmission, and to 0
during reception
0 = transmitter does not control RTS or DTR signal
1 = transmitter controls RTS or DTR signal
0 = RTSA/RTSB pin is used to control the external transceiver
1 = DTRA/DTRB pin is used to control the external transceiver
0 = transmitter is enabled
1 = transmitter is disabled
0 = receiver is enabled
1 = receiver is disabled
0 = normal RS-232 mode
1 = enable 9-bit mode
SC16C852V
© NXP B.V. 2011. All rights reserved.
37 of 55