73S1210F Maxim, 73S1210F Datasheet - Page 31

no-image

73S1210F

Manufacturer Part Number
73S1210F
Description
The 73S1210F is a versatile and economical CMOS system-on-chip (SoC) device intended for smart card reader applications
Manufacturer
Maxim
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
73S1210F-68IM
Manufacturer:
TERIDIAN
Quantity:
4 644
Part Number:
73S1210F-68IM/F
Manufacturer:
TERIDIAN
Quantity:
7 728
Part Number:
73S1210F-68IMR/F
Manufacturer:
ST
Quantity:
12 000
Company:
Part Number:
73S1210F68IM
Quantity:
369
DS_1210F_001
Miscellaneous Control Register 1 (MISCtl1): 0xFFF2  0x10
Master Clock Control Register (MCLKCtl): 0x8F  0x0A
*Note: The HSOEN bit should never be set under normal circumstances. Power down control should
only be initiated via use of the PWRDN bit in MISCtl0.
Rev. 1.4
MCLKCtl.7
MCLKCtl.6
MCLKCtl.5
MCLKCtl.4
MCLKCtl.3
MCLKCtl.2
MCLKCtl.1
MCLKCtl.0
MISCtl1.7
MISCtl1.6
MISCtl1.5
MISCtl1.4
MISCtl1.3
MISCtl1.2
MISCtl1.1
MISCtl1.0
Bit
Bit
MSB
MSB
HSOEN
FLSH66
HSOEN*
Symbol
FRPEN
Symbol
MCT.2
MCT.1
MCT.0
KBEN
SCEN
KBEN
Flash Read Pulse enable (low). If FRPEN = 1, the Flash Read signal is
passed through with no change. When FRPEN = 0 a one-shot circuit that
shortens the Flash Read signal is enabled to save power. The Flash Read
pulse will shorten to 40 or 66ns (approximate based on the setting of the
FLSH66 bit) in duration, regardless of the MPU clock rate. For MPU clock
frequencies greater than 10MHz, this bit should be set high.
When high, creates a 66ns Flash read pulse, otherwise creates a 40ns
read pulse when FRPEN is set.
High-speed oscillator enable. When set = 1, disables the high-speed
crystal oscillator and VCO/PLL system. This bit is not changed when the
PWRDN bit is set but the oscillator/VCO/PLL is disabled.
1 = Disable the keypad logic clock. This bit is not changed in PWRDN
mode but the function is disabled.
1 = Disable the smart card logic clock. This bit is not changed in PWRDN
mode but the function is disabled. Interrupt logic for card insertion/removal
remains operable even with smart card clock disabled.
This value determines the ratio of the VCO frequency (MCLK) to the
high-speed crystal oscillator frequency such that:
MCLK = (MCount*2 + 4)*Fxtal. The default value is MCount = 2h such
that MCLK = (2*2 + 4)*12.00MHz = 96MHz.
FRPEN
SCEN
Table 17: The MCLKCtl Register
Table 16: The MISCtl1 Register
FLSH66
Function
MCT.2
Function
MCT.1
MCT.0
73S1210F Data Sheet
LSB
LSB
31

Related parts for 73S1210F