NCP2991FCT2G ON Semiconductor, NCP2991FCT2G Datasheet - Page 14

• Manufacturer Part Number: NCP2991FCT2G
• Description: IC PWR AMP AUDIO 1.35W 9-CSP
• Manufacturer: ON Semiconductor
• Type: Class ABr

Specifications of NCP2991FCT2G

• Output Type: 1-Channel (Mono)
• Max Output Power X Channels @ Load: 1.35W x 1 @ 8 Ohm
• Voltage - Supply: 2.5 V ~ 5.5 V
• Features: Depop, Shutdown, Thermal Protection
• Mounting Type: Surface Mount
• Package / Case: 9-FlipChip
• Operational Class: Class-AB
• Audio Amplifier Output Configuration: 1-Channel Mono
• Audio Amplifier Function: Speaker
• Single Supply Voltage (typ): 3/5V
• Dual Supply Voltage (typ): Not RequiredV
• Power Supply Requirement: Single
• Power Dissipation: 650mW
• Rail/rail I/o Type: No
• Single Supply Voltage (min): 2.5V
• Single Supply Voltage (max): 5.5V
• Dual Supply Voltage (min): Not RequiredV
• Dual Supply Voltage (max): Not RequiredV
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

high−pass filter with R
in low frequencies without severe attenuation.
IEC 61000-4-2 Level 4
extra ESD protection to pass IEC 61000-4-2 Level 4
qualification.
of protection:
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
fc
ORDERING INFORMATION
Specifications Brochure, BRD8011/D.
NCP2991FCT2G
The size of the capacitor must be large enough to couple
In some particular applications, NCP2991 may need
Depending on the test, user can consider different level
+
2 * P * R in * C in
1
Device
.
in
, the cut−off frequency is given by
http://onsemi.com
9−Pin Flip−Chip
(Pb−Free)
Package
14
− up to 22 pF capacitor connected between each amplifier
− Dedicated IEC filters such as ESD7.0 series from
possible to the ESD stress entry point. Proper and carefull
layout is a key factor to ensure optimum protection level is
achieved. Designer should make sure the connection
impedance between protection and ground / protection and
NCP2991 is as low as possible.
In any case, the protection should be placed as close as
output terminals and ground.
ON Semiconductor.
3000 / Tape & Reel
Shipping
†