S1D13705F00A200 Epson, S1D13705F00A200 Datasheet - Page 76

• Manufacturer Part Number: S1D13705F00A200
• Manufacturer: Epson

Specifications of S1D13705F00A200

• Operating Supply Voltage (typ): 3.3/5V
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Package Type: TQFP
• Pin Count: 80
• Mounting: Surface Mount
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 5.5V
• Lead Free Status / Rohs Status: Compliant

12.2.1 How to Set Up Alternate SwivelView Mode
S1D13705F00A HARDWARE FUNCTIONAL
SPECIFICATION (X27A-A-001-06)
The following describes the register settings needed to set up Alternate SwivelView Mode for a
320 480 4 bpp image.
• Select Alternate SwivelView Mode:
• The display refresh circuitry startsP at pixel “B”, therefore the Screen 1 Start Address register
• The Line Byte Count Register for SwivelView Mode must be set to the image width in bytes, i.e.
• Panning is achieved by changing the Screen 1 Start Address register:
• Increment the register by 1 to pan horizontally by one byte, e.g. two pixels in 4 bpp mode
• Increment the register by the value in the Line Byte Count register to pan vertically by one line,
REG[1Bh] bit 7 = 1 and bit 6 = 1
must be programmed with the address of pixel “B”, or
e.g. add A0h to pan by one line in the example above
REG[10h], REG[0Dh], REG[0Ch]
REG 1Ch
Where bpp is bits-per-pixel and bpb is bits-per-byte.
Where bpb is bits-per-byte and bpp is bits-per-pixel.
=
----------------------------------------- -
8bpb
320
EPSON
4bpp
=
=
=
=
=
320
-------- -
Address Of Pixel B
Address Of Pixel A
Address Of Pixel A
2
Address Of Pixel A
=
160
=
A0h
+
+
+
9Fh
Byte Offset
320pixels 4bpp
--------------------------------------------
12: SWIVELVIEW MODE
8bpb
–
1-67
1