PIC18F1320-H/P Microchip Technology, PIC18F1320-H/P Datasheet - Page 157

• Manufacturer Part Number: PIC18F1320-H/P
• Description: IC MCU 8BIT 8KB FLASH 18PDIP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F1320-H/P

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Size: 8KB (4K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 150°C
• Package / Case: 18-DIP (0.300", 7.62mm)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

17.0
The Analog-to-Digital (A/D) converter module has
seven inputs for the PIC18F1220/1320 devices. This
module allows conversion of an analog input signal to
a corresponding 10-bit digital number.
A new feature for the A/D converter is the addition of
programmable acquisition time. This feature allows the
user to select a new channel for conversion and to set
the GO/DONE bit immediately. When the GO/DONE bit
is set, the selected channel is sampled for the pro-
grammed acquisition time before a conversion is actu-
ally started. This removes the firmware overhead that
may have been required to allow for an acquisition
(sampling) period (see Register 17-3 and Section 17.3
“Selecting and Configuring Automatic Acquisition
Time”).
REGISTER 17-1:
© 2007 Microchip Technology Inc.
10-BIT ANALOG-TO-DIGITAL
CONVERTER (A/D) MODULE
bit 7-6
bit 5
bit 4-2
bit 1
bit 0
ADCON0: A/D CONTROL REGISTER 0
VCFG<1:0>: Voltage Reference Configuration bits
Unimplemented: Read as ‘0’
CHS2:CHS0: Analog Channel Select bits
000 = Channel 0 (AN0)
001 = Channel 1 (AN1)
010 = Channel 2 (AN2)
011 = Channel 3 (AN3)
100 = Channel 4 (AN4)
101 = Channel 5 (AN5)
110 = Channel 6 (AN6)
111 = Unimplemented
GO/DONE: A/D Conversion Status bit
When ADON = 1:
1 = A/D conversion in progress
0 = A/D Idle
ADON: A/D On bit
1 = A/D converter module is enabled
0 = A/D converter module is disabled
Legend:
R = Readable bit
-n = Value at POR
bit 7
VCFG1
R/W-0
00
01
10
11
Note 1: Performing a conversion on unimplemented channels returns full-scale results.
External V
External V
A/D V
VCFG0
R/W-0
AV
AV
DD
DD
REF
REF
REF
+
+
+
(1)
U-0
—
W = Writable bit
‘1’ = Bit is set
External V
External V
A/D V
AV
AV
SS
SS
REF
R/W-0
CHS2
REF
REF
-
The module has five registers:
• A/D Result High Register (ADRESH)
• A/D Result Low Register (ADRESL)
• A/D Control Register 0 (ADCON0)
• A/D Control Register 1 (ADCON1)
• A/D Control Register 2 (ADCON2)
The ADCON0 register, shown in Register 17-1,
controls the operation of the A/D module. The
ADCON1 register, shown in Register 17-2, configures
the functions of the port pins. The ADCON2 register,
shown in Register 17-3, configures the A/D clock
source, programmed acquisition time and justification.
-
-
R/W-0
CHS1
PIC18F1220/1320
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-0
CHS0
GO/DONE
x = Bit is unknown
R/W-0
DS39605F-page 155
R/W-0
ADON
bit 0