WGCE5039 Intel, WGCE5039 Datasheet - Page 26

• Manufacturer Part Number: WGCE5039
• Manufacturer: Intel

Specifications of WGCE5039

• Lead Free Status / Rohs Status: Compliant

Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
Note 6:
Note 7:
Note 8:
Note 9:
Note 10: IM2 product from two input tones at 1.05 and 1.1 GHz at -18 dBm, generating IM product at 2150 MHz.
Note 11: Crystal specifications vary considerably and significantly effect the choice of external oscillator capacitor values. Each
External Port P0
Sink Current
Leakage Current
SLEEP Input
Input high voltage
Input low voltage
Input Current
Characteristic
AGC set to deliver an output of 0.5 Vp-p with an input CW @ frequency fc of -25 dBm, undesired tones at fc+146 and
fc+155 MHz @ -18 dBm, generating output IM spur at 9 MHz. Measured relative to unwanted signal.
LO set to 2145 MHz and AGC set to deliver a 5 MHz output of 0.5 Vp-p with an input CW @ frequency 2150 MHz of –25 dBm.
Undesired tones at 1.05 and 1.1 GHz at -25 dBm generating IM spur at 5 MHz baseband. Measured relative to unwanted
signal.
AGC set to deliver an output of 0.5 Vp-p with an input CW @ frequency fc of -25 dBm. Two undesired tones at fc+205 and
fc+405 MHz at -18 dBm, generating output IM spur at 5 MHz.
AGC set to deliver an output of 0.5 Vp-p with an input CW @ frequency fc of -25 dBm. Two undesired tones at fc+205 and
fc+405 MHz at -24 dBm, generating output IM spur at 5 MHz.
Two undesired tones at 1.05 and 1.1 GHz at 0 dBc relative to desired at 2.15 GHz, Local oscillator tuned to 2.145 GHz with
AGC set to deliver 0.5 Vp-p differential on desired signal. Desired input signal is varied from -25 dBm to -75 dBm.
Two undesired tones at fc+55 and fc+105 MHz at 7 dBc relative to desired at fc converted to 5 MHz baseband with local
oscillator tuned to fc GHz with AGC set to deliver 0.5 Vp-p differential on desired signal. Desired input signal is varied from -
30 dBm to -75 dBm, with the undesired amplitude capped at -25 dBm.
The level of 2.01 GHz down converted to baseband relative to 1.01 GHz with the oscillator tuned to 1 GHz.
Reference VCO gain value for loop filter calculations. Using this recommended value then takes into account VCO switching
and automatic charge pump current variations.
Two input tones at fc+50 and fc+100 MHz at -18 dBm, generating output IM product at fc.
application may require separate consideration for optimum performance.
Min.
Vee
1.9
3
Typ.
Intel Corporation
Max.
CE5039
3.6
1.0
10
10
26
Units
mA
μA
μA
V
V
Vo = 0.7 V
Vo = Vcc
Vin = Vee to VccDIG
Conditions
Data Sheet