DT28F800F3B95 Intel, DT28F800F3B95 Datasheet - Page 34

• Manufacturer Part Number: DT28F800F3B95
• Manufacturer: Intel

Specifications of DT28F800F3B95

• Density: 8Mb
• Access Time (max): 95ns
• Interface Type: Parallel
• Boot Type: Bottom
• Address Bus: 19b
• Operating Supply Voltage (typ): 3/3.3V
• Operating Temp Range: -40C to 85C
• Package Type: SSOP
• Sync/async: Async/Sync
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Word Size: 16b
• Number Of Words: 512K
• Supply Current: 60mA
• Mounting: Surface Mount
• Pin Count: 56
• Lead Free Status / Rohs Status: Not Compliant

28F800F3—Automotive
8.0
8.1
28
Warning:
Electrical Specifications
Absolute Maximum Ratings
NOTES:
Stressing the device beyond the “Absolute Maximum Ratings” may cause permanent damage.
These are stress ratings only. Operation beyond the “Operating Conditions” is not recommended
and extended exposure beyond the “Operating Conditions” may affect device reliability.
1. All specified voltages are with respect to GND. Minimum DC voltage is –0.5 V on input/output pins and
2. Maximum DC voltage on V
3. Output shorted for no more than one second. No more than one output shorted at a time.
4. V
Temperature under Bias
Storage Temperature
Voltage On Any Pin (except V
V
V
Output Short Circuit Current
NOTICE: This datasheet contains preliminary information on new products in production. The specifications are
subject to change without notice. Verify with your local Intel Sales office that you have the latest datasheet before
finalizing a design
PP
CC
–0.2 V on V
Maximum DC voltage on input/output pins is 5.5 V and V
may overshoot to V
1000 cycles on the main blocks and 2500 cycles on the parameter blocks during program/erase. V
connected to 12 V for a total of 80 hours maximum.
PP
Voltage
and V
Program voltage is normally 3.0 V–3.6 V. Connection to supply of 11.4 V–12.6 V can only be done for
CCQ
CC
Voltage
.
and V
CC
PP
+2.0 V for periods <20 ns.
pins. During transitions, this level may undershoot to –2.0 V for periods <20 ns.
PP
CC
may overshoot to +14.0 V for periods <20 ns.
, V
Parameter
CCQ
, and V
PP
)
CC
and V
CCQ
is V
CC
+ 0.5 V which, during transitions,
–40 °C to +125 °C
–65 °C to +125 °C
–0.5 V to +5.5 V
–0.5 V to +13.5 V
–0.2 V to +5.0 V
100 mA
Maximum Rating
(3)
PRELIMINARY
(1)
(1)
(1, 2, 4)
PP
may be