PPC440GX-3NF667C Applied Micro Circuits Corporation, PPC440GX-3NF667C Datasheet - Page 91

• Manufacturer Part Number: PPC440GX-3NF667C
• Manufacturer: Applied Micro Circuits Corporation

Specifications of PPC440GX-3NF667C

• Family Name: 440GX
• Device Core: PowerPC
• Device Core Size: 32b
• Frequency (max): 667MHz
• Instruction Set Architecture: RISC
• Supply Voltage 1 (typ): 1.55/2.5V
• Operating Supply Voltage (max): 1.6/2.7V
• Operating Supply Voltage (min): 1.5/2.3V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 552
• Package Type: FCBGA
• Lead Free Status / Rohs Status: Compliant

Revision 1.20 – June 9, 2009
AMCC
Data Sheet
02/08/2006
04/04/2006
06/09/2006
09/11/2006
09/26/2006
02/23/2007
03/05/2007
08/30/2007
04/03/2008
07/16/2008
09/16/2008
09/22/2008
11/06/2008
12/19/2008
06/09/2009
Date
Correct timing changes made in 12/22/05 version.
Add six new PNs (two 533MHz and four 677MHz).
Remove two PNs (no Z shipping for 3NF533C or 3FF533C)
Update clocking specs and EEPROM information.
Add four posts to plastic package drawing.
Reduce maximum E temperature rating for selected plastic parts.
Remove five PNs (end of life)
Add/change timing data (system and DDR SDRAM) for 800MHz Rev F parts
Increase minimum CPU frequency from 300MHz to 333MHz.
Increase SV
Add two new ceramic 400MHz PNs. One is leaded (C) and the other is reduced-lead (R).
Change T
Change the technical support telephone and fax number.
Remove power supply power-up sequence requirements.
Change package type to ceramic for PPC440GX-3RF400C (Doc Issue 549).
Doc Issue 408. Rename AGND pins according to the analog voltage with which they are associated.
Doc Issue 483. Add two RGMII I/O timing waveforms.
Doc Issue 595. Add pull-up and pull-down resistor values.
Bugzilla Issue 4921. Increase OPB clock minimum frequency specification.
Bugzilla Issue 5432. Modified the minimum and maximum values of the MemClkOut and PLB, OPB, and MAL in the
Clocking Specifications table on page 64.
Added notes 2 and 3.
Removed EOL part numbers.
Added Notes regarding operation of the 667MHz part at 533MHz or less at higher temperatures (+105C for ceramic
and +100C for plastic).
Removed 800MHz.
Removed 200MHz DDR timing.
OH
DD
values for RGMII signals.
for DDR SDRAM parts operating a 200MHz.
440GX – Power PC 440GX Embedded Processor
Contents of Modification
91