NOIL2SM1300A-GWC ON Semiconductor, NOIL2SM1300A-GWC Datasheet - Page 22

• Manufacturer Part Number: NOIL2SM1300A-GWC
• Manufacturer: ON Semiconductor

Specifications of NOIL2SM1300A-GWC

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Slave Mode
tint_timer are ignored. The integration time is controlled by
the int_time pin. The relationship between the input pin and
the integration time is shown in Figure 15. When the input
result in image artefacts during a small transient period. As
Triggered Shutter
are:
•
•
are:
•
•
In slave mode, the register values of res_length and
Changing pixel’s reset level during line readout might
The two main differences in the pipelined shutter mode
The possible applications for this triggered shutter mode
One single image is read upon every user action.
Integration (and read out) is under control of the user
through pin int_time.
Synchronize external flash with exposure
Apply extremely long integration times (only in slave mode)
int_time1
Readout
Handling
Reset Exposure Time N
ROT
Line
Readout
Figure 16. Integration and Readout for Triggered Shutter
Figure 15. Integration and Image Readout in Slave Mode
http://onsemi.com
FOT
FOT
22
Reset
Readout N
pin int_time is asserted, the pixel array goes out of reset and
exposure can begin. When int_time goes low again and the
desired exposure time is reached, the image is sampled and
read out can begin.
a result, it is advised to only change the value of int_time
during ROT.
intervene. The pixel array is kept in reset state until you
assert the int_time input. Similar to the pipelined shutter
mode, there is a master mode in which the sequencer can
control the integration time, or a slave mode in which you
can define the integration time.
This means that for every frame, you need to manually
Exposure Time
N + 1
FOT
FOT
Readout
Reset
N+1
N+1