3342-5 Peregrine Semiconductor, 3342-5 Datasheet - Page 9

• Manufacturer Part Number: 3342-5
• Description: EVAL KIT FOR PE3342
• Manufacturer: Peregrine Semiconductor
• Series: -r

Specifications of 3342-5

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 3342-05; 3342-50

Figure 1. Evaluation Kit Default Jumper & Switch Settings Using on-board Reference.
Evaluation Kit Setup
1. Verify a jumper is placed on the connector J5 and REF Selector (J6) is positioned in
2. Verify that no jumper is placed on the connector J2; Switch 1 of SW1 is at “ON”
3. Verify that the jumper is at center-to-right connection on the connector J8. This is to
4. Connect power supply cable to the Evaluation Kit board as shown in Figure 1. Note
Peregrine Semiconductor Corportation
Verify all supplies are turned off prior to connecting to evaluation board.
the middle-to-right connection to select the on-board reference as shown in Figure 1.
position and the rest of the switches are at “OFF” position.
prevent VPP from being accidentally activated.
that the red connector of the power cable is always the positive and the black
connector is ground in a 2-wire cable or the negative in a 4-wire cable.
SW1 Switch 1
"On"
J2 Un-jumpered
reference to J7 if the on-board
DO NOT connect any extenal
J8 center-to-right
EE programming
set to decativate
reference is used

9
J6 center-to-right
set to utilize on-
board reference
VCO output
J5 on-board
reference
powered
+
+
+
-
-
-
Doc. 79/0073~00C
J3-9 & -11 GND
Opamp power:
PLL power:
J3-3 GND
J3-13 -2V
VCO power:
J3-7 +6V
J3-1 +3V
J3-19 GND
J3-17 +5V