3342-5 Peregrine Semiconductor, 3342-5 Datasheet - Page 13

• Manufacturer Part Number: 3342-5
• Description: EVAL KIT FOR PE3342
• Manufacturer: Peregrine Semiconductor
• Series: -r

Specifications of 3342-5

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 3342-05; 3342-50

26-Wire PSC Universal LPT1 Interface Cable Configuration
The following graph shows the 26-Wire PSC Universal LPT1 Interface Cable
configuration.
Evaluation Kit Configuration for EEPROM Programming
Peregrine Semiconductor Corportation
1. Place a jumper on the connector J2 as shown in Figure 3.
2. Set all switches on SW1 to “OFF” position.
3. Connect one end of the 26-Wire PSC Universal LPT1 Interface Cable to the PC
4. Connect power supply cables to the Evaluation Kit board as shown in Figure 3.
parallel port and the other end to the keyed connector J1 on the evaluation board.
Note that the red connector of the power cable is always the positive and the
black connector is ground in a 2-wire cable or the negative in a 4-wire cable.
Verify all supplies are turned off prior to connecting to evaluation board.
Connect the +3 V supply to J3-1 (+) and J3-3 (GND)
Connect the +5 V supply to J3-17 (+) and J3-19 (GND)
Connect the +6/-2 V supply to J3-7 (+6V), J3-9 and -11 (GND), and J3-13 (-
2V)

13
Doc. 79/0073~00C