3342-5 Peregrine Semiconductor, 3342-5 Datasheet - Page 10

• Manufacturer Part Number: 3342-5
• Description: EVAL KIT FOR PE3342
• Manufacturer: Peregrine Semiconductor
• Series: -r

Specifications of 3342-5

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 3342-05; 3342-50

5. Turn on the powers to the board.
6. The output of the on-board VCO can be measured by connecting a spectrum
7. Using the application software provided and described in detail in the next section,
Figure 2. Jumper Setting to Use an External Reference
Peregrine Semiconductor Corportation
The PE3342 EEPROM on the evaluation board has been programmed and tested
before stocking. No connection to J1 or J9 is necessary for normal operation. To
prevent the EEPROM from being accidentally erased or re-programmed, always
place a jumper at center-to-right connection on the connector J8 to prevent VPP from
being accidentally activated.
analyzer to port J4. Before making modifications to the board, verify and duplicate
the performance found in the included plots. Additional GND posts and test points
are available on the Evaluation Board for measurement flexibility.
EEPROM programming can be evaluated.
Connect the +3 V supply to J3-1 (+) and J3-3 (GND)
Connect the +6/-2 V supply to J3-7 (+6V), J3-9 and -11 (GND), and J3-13 (-2V)
Connect the +5 V supply to J3-17 (+) and J3-19 (GND)
SW1 Switch 1
"On"
Connect an extenal reference to J7
J2 Un-jumpered
J8 center-to-right
EE programming
set to decativate

10
J6 center-to-left set
to utilize external
reference
VCO output
board reference
J5 un-jumpered
to decative on-
+
+
+
-
-
-
Doc. 79/0073~00C
PLL power:
J3-9 & -11 GND
J3-3 GND
VCO power:
J3-1 +3V
Opamp power:
J3-19 GND
J3-17 +5V
J3-13 -2V
J3-7 +6V