PTC-04-DB-CALIB Melexis Inc, PTC-04-DB-CALIB Datasheet - Page 7

• Manufacturer Part Number: PTC-04-DB-CALIB
• Description: DUAGHTER BOARD CALIBRATION
• Manufacturer: Melexis Inc
• Series: -r

Specifications of PTC-04-DB-CALIB

• Accessory Type: Calibration Software
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: PTC Programmer

If you don’t use a Keithley 2000 or Agilent 34401A multi meter, you have to use a high accuracy
voltmeter. The accuracy of the calibration depends on the precision of the voltmeter and the number of
digits entered. With a manual voltmeter, the program will start with calibrating the internal voltmeter which
will be used to check the PTC04 programmer.
At this stage the software will check if the calibration board and, if selected, the Keithley 2000 or Agilent
34401A Multimeter are connected. If the calibration board is not detected, a message is shown.
User manual calibration software PTC04
UI_0PTC04AAMLX Rev. 1.35
•
•
Press yes to continue.
If the setup is not complete, press No, switch of the programmer, check your setup and restart the
program.
Calibration Software PTC04
Figure 7: Proceed Check?
Figure 8: Check setup
Page 7 of 17
User Manual
February 10