9946 3M, 9946 Datasheet - Page 8

• Manufacturer Part Number: 9946
• Description: Soldering Tools .072 HOT MELT TIP SCOTCH WELD 3PC BAG
• Manufacturer: 3M
• Type: Brass Extension Tipr

Specifications of 9946

• Tip Size: 0.072 mm
• Product: Soldering Tips
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 021200-22040

Changing Tips
The 3M Scotch-Weld Hot Melt Applicator PG II LT
includes a 9921 (.093’’) tip as standard equipment.
Other tips, available from your 3M Scotch-Weld Hot
Melt Adhesive distributor, are shown on page 22 of
this manual.
© 3M 2006
Contact with molten adhesive or hot applicator tip or
metal components may cause burns. Wear heat-
resistant gloves and safety glasses when operating or
repairing the 3M™ Scotch-Weld™ Hot Melt
Applicator PG II LT.
Disconnect air supply before changing tips.
!
Caution
Note
Tips can be changed only when the applicator is
hot. You will need a 5/8’’ and a 1/2’’ open-end
wrench. Hold the nozzle valve hex firmly with the
5/8’’ wench, while removing the nozzle tip with the
1/2’’ wrench. The accessory tip is mounted using the
reverse procedure. Snug the tip lightly.
Do not tighten the tip. Overtightening could
damage the valve assembly.
Note
Operation
6