9946 3M, 9946 Datasheet - Page 10

• Manufacturer Part Number: 9946
• Description: Soldering Tools .072 HOT MELT TIP SCOTCH WELD 3PC BAG
• Manufacturer: 3M
• Type: Brass Extension Tipr

Specifications of 9946

• Tip Size: 0.072 mm
• Product: Soldering Tips
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 021200-22040

During Operation
Always use the bench stand provided when 3M™
Scotch-Weld™ Hot Melt Applicator PG II LT is not
in use. Do not lay the applicator on its side. This
impedes cooling process and may cause plugging
problems.
Open adhesive cartridge stick only when necessary.
Keep sticks clean and free from airborne
contaminants.
© 3M 2006
After Operation
Before shutting down the 3M Scotch-Weld Hot Melt
Applicator PG II LT, put the electrical switch in the
“off” position. Continue using the applicator until
approximately one adhesive stick has been
discharged.
Lubricate inside loading chamber with 3M™ Silicone
Lubricant or equivalent once a week.
Preventive Maintenance
If proper shutdown procedure has not been
followed, up to one hour heat up prior to use may
be required.
Note
8