S3K2U1000-5 SOLA HEVI DUTY, S3K2U1000-5 Datasheet - Page 31

• Manufacturer Part Number: S3K2U1000-5
• Description: UPS - Uninterruptible Power Supplies 1000VA/750W 230V
• Manufacturer: SOLA HEVI DUTY

Specifications of S3K2U1000-5

• Power Rating: 1000 VA
• Output Voltage Rating: 230 V
• Number Of Outlets: 8
• Interface Port: USB / SNMP
• Runtime (full Load): 5 min
• Runtime (half Load): 12 min
• Topology: Line Interactive
• Tower / Rackmount: Tower / Rackmount
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

9.0
Figure 17 Load Level Indicators
Voltage
Programming
Button
V
1. Remove the front bezel from the UPS.
2. UPS must be operating in Normal (AC) mode.
3. The AC Input, Load, and Battery Level Indicators should be lit.
4. Press the Voltage Programming button for at least 5 seconds to enter the Configuration mode.
5. Press the ON button to step through the voltage settings until the appropriate Load Level
6. Press the Voltage Programming button. The UPS will return to Normal mode operation.
The Voltage Programming button allows the operator to select the mains transfer voltage at which
the UPS will switch to battery power (see Table 2). This also changes the inverter voltages.
Table 2
OLTAGE
The UPS will beep and all of the indicators on the front panel display will flash on and off for
approximately 5 seconds. The next cycle will display the current configuration, either 220, 230 or
240 VAC. One of the Load Level Indicators will be flashing. Initially, the 0%-25% Load Level
Indicator will be flashing, indicating the default setting of 230V as shown in Figure 17.
Indicator is flashing.
120V (230V)
110V (220V)
127V (240V)
Setting
NOTE
Mains power will be applied to the connected load.
Voltage settings
P
ROGRAMMING
Input Voltage
166 - 272VAC
158 - 260VAC
172 - 283VAC
(default)
Range
P
ROCEDURE
Output Voltage
(Battery Mode)
230VAC
220VAC
240VAC
25
Voltage Programming Procedure
Load Level
Indicators