S3K2U1000-5 SOLA HEVI DUTY, S3K2U1000-5 Datasheet - Page 19

• Manufacturer Part Number: S3K2U1000-5
• Description: UPS - Uninterruptible Power Supplies 1000VA/750W 230V
• Manufacturer: SOLA HEVI DUTY

Specifications of S3K2U1000-5

• Power Rating: 1000 VA
• Output Voltage Rating: 230 V
• Number Of Outlets: 8
• Interface Port: USB / SNMP
• Runtime (full Load): 5 min
• Runtime (half Load): 12 min
• Topology: Line Interactive
• Tower / Rackmount: Tower / Rackmount
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Figure 7
Figure 8
Flat Head Screws
Two (2) M4x6
2. Unpack the two fixed rail assemblies and mounting hardware. Loosen the wing nuts and extend
3. Determine the height position inside the rack enclosure where you want to mount the UPS or
4. Attach the two (2) fixed rails to the racks mounting rails. The fixed rail assemblies fit on the
5. Insert two (2) M5 flat head screws loosely (finger-tight) into the top and bottom holes on the front
6. Extend fixed rail by sliding inner member backward until it touches the rear rack mounting rail.
7. Insert two (2) M5 screws loosely (finger-tight) into top and bottom holes on the rear of the fixed
8. Check alignment of fixed rails and tighten all screws to ensure locking action.
!
Rack mount handles
Fixed rails with inner members extended
the inner members to their outermost position (see Figure 8).
battery cabinet. Make sure fixed rails are at the same mounting height on each of the four (4) rack
mounting rails.
inside of the rack mounting rails.
of the fixed rail assembly (see Figure 9).
rail assembly.
CAUTION
Reduce the risk of tipping the rack enclosure by placing the UPS or battery cabinet in the
lowest possible rack position.
Adjustable Length
Maximum 800 mm
Minimum 485 mm
Rack Mount Handles
Wing Nuts for
Adjustment
13
Adjustable Slide
Assembly
Two (2) M4x6
Flat Head Screws
M4x6 Flat Screw
Installation