DSPIC30F3012-30I/P Microchip Technology Inc., DSPIC30F3012-30I/P Datasheet - Page 3

• Manufacturer Part Number: DSPIC30F3012-30I/P
• Description: 16 BIT MCU/DSP 18LD 30MIPS 24 KB FLASH
• Manufacturer: Microchip Technology Inc.
• Type: DSPr

Specifications of DSPIC30F3012-30I/P

• A/d Inputs: 8-Channels, 12-Bit
• Cpu Speed: 30 MIPS
• Eeprom Memory: 1K Bytes
• Input Output: 12
• Interface: I2C/SPI/UART, USART
• Ios: 12
• Memory Type: Flash
• Number Of Bits: 16
• Package Type: 18-pin PDIP
• Programmable Memory: 24K Bytes
• Ram Size: 2K Bytes
• Timers: 3-16-bit, 1-32-bit
• Voltage, Range: 2.5-5.5
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

High-Performance Modified RISC CPU:
• Modified Harvard architecture
• C compiler optimized instruction set architecture
• Flexible addressing modes
• 83 base instructions
• 24-bit wide instructions, 16-bit wide data path
• Up to 24 Kbytes on-chip Flash program space
• Up to 2 Kbytes of on-chip data RAM
• Up to 1 Kbytes of nonvolatile data EEPROM
• 16 x 16-bit working register array
• Up to 30 MIPS operation:
• Up to 21 interrupt sources:
DSP Features:
• Dual data fetch
• Modulo and Bit-Reversed modes
• Two 40-bit wide accumulators with optional
• 17-bit x 17-bit single-cycle hardware fractional/
• All DSP instructions are single cycle
• single-cycle ±16 shift
Peripheral Features:
• High-current sink/source I/O pins: 25 mA/25 mA
• Three 16-bit timers/counters; optionally pair up
• 16-bit Capture input functions
© 2006 Microchip Technology Inc.
Note: This data sheet summarizes features of this group
of dsPIC30F devices and is not intended to be a complete
reference source. For more information on the CPU,
peripherals, register descriptions and general device
functionality, refer to the “ dsPIC30F Family Reference
Manual” (DS70046). For more information on the device
instruction set and programming, refer to the “ dsPIC30F/
33F Programmer’s Reference Manual” (DS70157).
- DC to 40 MHz external clock input
- 4 MHz - 10 MHz oscillator input with
- 8 user-selectable priority levels
- 3 external interrupt sources
- 4 processor trap sources
saturation logic
integer multiplier
- Multiply-Accumulate (MAC) operation
16-bit timers into 32-bit timer modules
PLL active (4x, 8x, 16x)
dsPIC30F2011/2012/3012/3013 High-Performance
Digital Signal Controllers
dsPIC30F2011/2012/3012/3013
• 16-bit Compare/PWM output functions
• 3-wire SPI modules (supports four Frame modes)
• I
• Up to two addressable UART modules with FIFO
Analog Features:
• 12-bit Analog-to-Digital Converter (ADC) with:
• Programmable Low-Voltage Detection (PLVD)
• Programmable Brown-out Reset
Special Microcontroller Features:
• Enhanced Flash program memory:
• Data EEPROM memory:
• Self-reprogrammable under software control
• Power-on Reset (POR), Power-up Timer (PWRT)
• Flexible Watchdog Timer (WDT) with on-chip low-
• Fail-Safe Clock Monitor operation:
• Programmable code protection
• In-Circuit Serial Programming™ (ICSP™)
• Selectable Power Management modes:
CMOS Technology:
• Low-power, high-speed Flash technology
• Wide operating voltage range (2.5V to 5.5V)
• Industrial and Extended temperature ranges
• Low-power consumption
and 7-bit/10-bit addressing
buffers
- 200 ksps conversion rate
- Up to 10 input channels
- Conversion available during Sleep and Idle
- 10,000 erase/write cycle (min.) for
- 100,000 erase/write cycle (min.) for
and Oscillator Start-up Timer (OST)
power RC oscillator for reliable operation
- Detects clock failure and switches to on-chip
- Sleep, Idle and Alternate Clock modes
2
C™ module supports Multi-Master/Slave mode
industrial temperature range, 100K (typical)
industrial temperature range, 1M (typical)
low-power RC oscillator
DS70139D-page 1