DS2154L+ Maxim Integrated Products, DS2154L+ Datasheet - Page 34

• Manufacturer Part Number: DS2154L+
• Description: IC TXRX E1 1CHIP 5V ENH 100-LQFP
• Manufacturer: Maxim Integrated Products
• Type: Transceiverr

Specifications of DS2154L+

• Number Of Drivers/receivers: 1/1
• Protocol: E1
• Voltage - Supply: 4.75 V ~ 5.25 V
• Mounting Type: Surface Mount
• Package / Case: 100-LQFP
• Product: Framer
• Number Of Transceivers: 1
• Data Rate: 1.544 Mbps
• Supply Voltage (max): 5.25 V
• Supply Voltage (min): 4.75 V
• Supply Current (max): 75 mA (Typ)
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Ic Interface Type: Parallel, Serial
• Supply Voltage Range: 4.75V To 5.25V
• Operating Temperature Range: 0°C To +70°C
• Digital Ic Case Style: LQFP
• No. Of Pins: 100
• Filter Terminals: SMD
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

SR1: STATUS REGISTER 1 (Address = 06 Hex)
(MSB)
RSA1
SYMBOL
RDMA
RSLIP
RUA1
RLOS
RSA1
RSA0
RRA
RCL
RDMA
POSITION
SR1.7
SR1.6
SR1.5
SR1.4
SR1.3
SR1.2
SR1.1
SR1.0
RSA0
NAME AND DESCRIPTION
Receive Signaling All 1s/Signaling Change. Set when the
contents of time slot 16 contains less than three 0s over 16
consecutive frames. This alarm is not disabled in the CCS
signaling mode. Both RSA1 and RSA0 will be set if a change in
signaling is detected.
Receive Distant MF Alarm. Set when bit 6 of timeslot 16 in
frame 0 has been set for two consecutive multiframes. This
alarm is not disabled in the CCS signaling mode.
Receive Signaling All 0s/Signaling Change. Set when over a
full MF, time slot 16 contains all 0s. Both RSA1 and RSA0 will
be set if a change in signaling is detected.
Receive Side Elastic Store Slip. Set when the elastic store has
either repeated or deleted a frame of data.
Receive Unframed All 1s. Set when an unframed all 1s code is
received at RPOSI and RNEGI.
Receive Remote Alarm. Set when a remote alarm is received at
RPOSI and RNEGI.
Receive Carrier Loss. Set when 255 (or 2048 if CCR3.0 = 1)
consecutive 0s have been detected at RTIP and RRING. (Note: a
test mode exists to allow the DS2154 to detect carrier loss at
RPOSI and RNEGI in place of detection at RTIP and RRING).
Receive Loss of Sync. Set when the device is not synchronized
to the receive E1 stream.
RSLIP
34 of 87
RUA1
RRA
RCL
RLOS
(LSB)