PIC24FJ64GA006-I/PT Microchip Technology Inc., PIC24FJ64GA006-I/PT Datasheet - Page 146

• Manufacturer Part Number: PIC24FJ64GA006-I/PT
• Description: 64 PIN, 64KB FLASH, 8 KB RAM, 53 I/O
• Manufacturer: Microchip Technology Inc.

Specifications of PIC24FJ64GA006-I/PT

• A/d Inputs: 16 Channel, 10-Bit
• Comparators: 2
• Cpu Speed: 16 MIPS
• Eeprom Memory: 0 Bytes
• Input Output: 53
• Interface: I2C/SPI/UART
• Memory Capacity: 64 Kbytes
• Memory Type: Flash
• Number Of Bits: 16
• Number Of Inputs: 53
• Number Of Pins: 64
• Package Type: 64-pin TQFP
• Programmable Memory: 64K Bytes
• Ram Size: 8K Bytes
• Speed: 16 MHz
• Timers: 5-16-bit
• Voltage, Range: 2-3.6 V
• Voltage, Rating: 2-3.6 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

PIC24FJ128GA FAMILY
REGISTER 17-5:
DS39747C-page 144
bit 15
bit 14
bit 13-12 Unimplemented: Read as ‘0’
bit 11-8
bit 7
bit 6
bit 5-4
bit 3-0
Upper Byte:
bit 15
R-0
IBF
IBF: Input Buffer Full Status bit
1 = All writable input buffer registers are full
0 = Some or all of the writable input buffer registers are empty
IBOV: Input Buffer Overflow Status bit
1 = A write attempt to a full input byte register occurred (must be cleared in software)
0 = No overflow occurred
IBnF: Input Buffer n Status Full bit
1 = Input buffer contains data that has not been read (reading buffer will clear this bit)
0 = Input buffer does not contain any unread data
OBE: Output buffer Empty Status bit
1 = All readable output buffer registers are empty
0 = Some or all of the readable output buffer registers are full
OBUF: Output Buffer Underflow Status bit
1 = A read occurred from an empty output byte register (must be cleared in software)
0 = No underflow occurred
Unimplemented: Read as ‘0’
OBnE: Output Buffer n Status Empty bit
1 = Output buffer is empty (writing data to the buffer will clear this bit)
0 = Output buffer contains data that has not been transmitted
Legend:
R = Readable bit
-n = Value at Reset
R/W-0 HS
IBOV
Lower Byte:
bit 7
OBE
R-1
PMSTAT: PARALLEL PORT STATUS REGISTER
U-0
—
R/W-0 HS
OBUF
HS = Hardware Set
W = Writable bit
‘1’ = Bit is set
U-0
—
U-0
—
Preliminary
IB3F
R-0
U-0
—
HC = Hardware Cleared
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
IB2F
R-0
OB3E
R-1
IB1F
R-0
OB2E
R-1
© 2006 Microchip Technology Inc.
IB0F
R-0
x = Bit is unknown
bit 8
OB1E
R-1
OB0E
R-1
bit 0