PIC18F8520-I/PT Microchip Technology Inc., PIC18F8520-I/PT Datasheet - Page 215

• Manufacturer Part Number: PIC18F8520-I/PT
• Description: 80 PIN, 32 KB FLASH, 2048 RAM, 68 I/O
• Manufacturer: Microchip Technology Inc.

Specifications of PIC18F8520-I/PT

• A/d Inputs: 16-Channel, 10-Bit
• Comparators: 2
• Cpu Speed: 10 MIPS
• Eeprom Memory: 1024 Bytes
• Input Output: 68
• Interface: I2C/SPI/UART/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 80-pin TQFP
• Programmable Memory: 32K Bytes
• Ram Size: 2K Bytes
• Speed: 40 MHz
• Timers: 2-8-bit, 3-16-bit
• Voltage, Range: 2-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part

19.0
The analog-to-digital (A/D) converter module has 12
inputs for the PIC18F6X20 devices and 16 for the
PIC18F8X20 devices. This module allows conversion
of an analog input signal to a corresponding 10-bit
digital number.
REGISTER 19-1:
 2004 Microchip Technology Inc.
10-BIT ANALOG-TO-DIGITAL
CONVERTER (A/D) MODULE
bit 7-6
bit 5-2
bit 1
bit 0
PIC18F6520/8520/6620/8620/6720/8720
ADCON0 REGISTER
Unimplemented: Read as ‘0’
CHS3:CHS0: Analog Channel Select bits
0000 = Channel 0 (AN0)
0001 = Channel 1 (AN1)
0010 = Channel 2 (AN2)
0011 = Channel 3 (AN3)
0100 = Channel 4 (AN4)
0101 = Channel 5 (AN5)
0110 = Channel 6 (AN6)
0111 = Channel 7 (AN7)
1000 = Channel 8 (AN8)
1001 = Channel 9 (AN9)
1010 = Channel 10 (AN10)
1011 = Channel 11 (AN11)
1100 = Channel 12 (AN12)
1101 = Channel 13 (AN13)
1110 = Channel 14 (AN14)
1111 = Channel 15 (AN15)
GO/DONE: A/D Conversion Status bit
When ADON = 1:
1 = A/D conversion in progress (setting this bit starts the A/D conversion, which is automatically
0 = A/D conversion not in progress
ADON: A/D On bit
1 = A/D converter module is enabled
0 = A/D converter module is disabled
Legend:
R = Readable bit
- n = Value at POR
bit 7
Note 1: These channels are not available on the PIC18F6X20 (64-pin) devices.
U-0
—
cleared by hardware when the A/D conversion is complete)
U-0
—
R/W-0
CHS3
(1)
(1)
(1)
(1)
W = Writable bit
‘1’ = Bit is set
R/W-0
CHS2
The module has five registers:
• A/D Result High Register (ADRESH)
• A/D Result Low Register (ADRESL)
• A/D Control Register 0 (ADCON0)
• A/D Control Register 1 (ADCON1)
• A/D Control Register 2 (ADCON2)
The ADCON0 register, shown in Register 19-1, con-
trols the operation of the A/D module. The ADCON1
register, shown in Register 19-2, configures the func-
tions of the port pins. The ADCON2 register, shown in
Register 19-3, configures the A/D clock source and
justification.
R/W-0
CHS1
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-0
CHS0
GO/DONE
x = Bit is unknown
R/W-0
DS39609B-page 213
ADON
R/W-0
bit 0