TDA8026ET/C2,557 NXP Semiconductors, TDA8026ET/C2,557 Datasheet - Page 38

• Manufacturer Part Number: TDA8026ET/C2,557
• Description: IC SMART CARD SLOT 64TFBGA
• Manufacturer: NXP Semiconductors

Specifications of TDA8026ET/C2,557

• Controller Type: Smart Card Interface
• Interface: I²C
• Voltage - Supply: 2.7 V ~ 5.5 V
• Current - Supply: 210mA
• Operating Temperature: -25°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 64-TFBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NXP Semiconductors
TDA8026_1
Product data sheet
8.11 Fault detection
The fall time is calculated from 90 % to 10 % of the signal amplitude. The default setting
for IO_SR[0]/IO_SR[2] (low) and IO_SR[1]/IO_SR[3] (high) is LOW (see table
page
The following fault conditions are monitored by the TDA8026.
•
•
•
•
•
Overheating: All the card slots are automatically deactivated and the device is forced
in to Standby mode when the detected temperature range is between
125 C to 209 C. The card slot PROT bit is set to logic 1. Above 209 C the device is
shutdown.
Card removal during transaction: A deactivation sequence is performed in
accordance with the EMV 4.2 standard.
DC-to-DC converter overload: All card slots are automatically deactivated and the
device is placed in Standby mode when the current supplied by the DC-to-DC
converter exceeds 170 mA (I
logic 1
Card slot current limitation and deactivation: A current level drawn by a card which
exceeds 120 mA (I
faulty card slot. During the deactivation, the current is limited to approximately
110 mA. The card slot PROT bit is set to logic 1
V
card slot deactivation followed by a device reset. The completion of this phase is
validated when the SUPL bits are set to logic 1.
37).
DD
or V
DD(INTF)
All information provided in this document is subject to legal disclaimers.
dropping: A voltage drop occurring on V
sd
Rev. 1 — 9 March 2010
parameter for V
CC
parameter for V
CC(n)
) triggers the deactivation sequence on the
Multiple smart card slot interface IC
CC(n)
). The card slot PROT bit is set to
DD
or V
DD(iNTF)
TDA8026
© NXP B.V. 2010. All rights reserved.
generates
Table 39 on
38 of 59