20-101-1246 Rabbit Semiconductor, 20-101-1246 Datasheet - Page 70

• Manufacturer Part Number: 20-101-1246
• Description: CORE MODULE RCM5400W
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1246

• Module/board Type: MPU Core Module
• Wireless Frequency: 73.73 MHz
• For Use With/related Products: RCM5400W
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1148

•
•
64
deployed for any other requirements. Any attempt to operate a device outside the
allowed channel range or power limits will void your regulatory approval to operate
the device in that country.
Before you compile and run this sample program, uncomment the
WIFI_REGION
The Americas region will be used by default if one of these lines is not uncommented.
Now compile and run this sample program. The Dynamic C
play the region you selected.
The sample program also allows you to set up the TCP/IP configuration, and set the IP
address and SSID as shown in the sample code below.
REGION_MULTI_DOMAIN.C
access point can be used to configure your RCM5400W-based system to meet regional
regulations. The sample program includes pings to indicate that the RCM5400W-based
system has successfully received country information from your access point.
The country or region you select will automatically set the power and channel require-
ments to operate the RCM5400W module. Rabbit recommends that you check the
regulations for the country where your system incorporating the RCM5400W will be
deployed for any other requirements.
Before you compile and run this sample program, verify that the access point has the
802.11d option enabled and is set for the correct region or country. Check the TCP/IP
configuration parameters, the IP address, and the SSID in the macros, which are repro-
duced below.
Now compile and run this sample program. The
macro will display the channel and power limit settings. The Dynamic C
dow will then display a menu that allows you to complete the configuration of the user
interface.
REGION_RUNTIME_PING.C
run time to configure your RCM5400W-based system to meet regional regulations. The
sample program also shows how to save and retrieve the region setting from nonvola-
tile memory. Once the region/country is set, this sample program sends pings using the
limits you set.
The country or region you select will automatically set the power and channel require-
ments to operate the RCM5400W module. Digi International recommends that you
check the regulations for the country where your system incorporating the RCM5400W
will be deployed for any other requirements.
#define TCPCONFIG 1
#define _PRIMARY_STATIC_IP "10.10.6.170"
#define IFC_WIFI_SSID "rabbitTest"
#define TCPCONFIG 1
#define WIFI_REGION_VERBOSE
#define _PRIMARY_STATIC_IP "10.10.6.170"
#define IFC_WIFI_SSID "rabbitTest"
line corresponding to the region where your system will be deployed.
—demonstrates how the multi-domain options from the
—demonstrates how the region or country can be set at
#define WIFI_REGION_VERBOSE
STDIO
RabbitCore RCM5400W
#define IFC_
window will dis-
STDIO
win-