20-101-1246 Rabbit Semiconductor, 20-101-1246 Datasheet - Page 68

• Manufacturer Part Number: 20-101-1246
• Description: CORE MODULE RCM5400W
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1246

• Module/board Type: MPU Core Module
• Wireless Frequency: 73.73 MHz
• For Use With/related Products: RCM5400W
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1148

3. Click
Infrastructure Mode (via wireless connection)
Set the IP address and netmask for your wireless-enabled PC or notebook as described in
Step 2 for
Connections
Connection
program is running, you will be able to select the network from a list of available networks.
You will have to set your wireless network name with the access point SSID macro for the
infrastructure mode as explained in Section 6.3, “Dynamic C Wi-Fi Configurations.”
Ad-Hoc Mode
Set the IP address and netmask for your wireless-enabled PC or notebook as described in
Step 2 for
Connections
Connection
program is running, you will be able to select the network from a list of available networks.
You will have set your wireless network name with the Wi-Fi channel macros for the ad-
hoc mode as explained in Section 6.3, “Dynamic C Wi-Fi Configurations.”
62
2.
Now select the
Specify an IP Address
and click on “Properties” to fill in the fol-
lowing fields:
The IP address and netmask need to be set
regardless of whether you will be using the
ad-hoc mode or the infrastructure mode.
TIP: If you are using a PC that is already on
a network, you will disconnect the PC
from that network to run these sample
programs. Write down the existing set-
tings before changing them so that you
can restore them easily when you are fin-
ished with the sample programs.
IP Address : 10.10.6.101
Netmask : 255.255.255.0
Default gateway : 10.10.6.1
<OK>
Infrastructure Mode (via Ethernet connection)
Infrastructure Mode (via Ethernet connection)
to select the wireless network you will be connecting to. Once a sample
to select the wireless network you will be connecting to. Once a sample
, then on
, then on
or
IP Address
<Close>
Local Area Connection
Local Area Connection
, or select TCP/IP
to exit the various dialog boxes.
tab, and check
. Now click on
. Now click on
by clicking on
by clicking on
Wireless Network
Wireless Network
RabbitCore RCM5400W
Network
Network