EP2SGX30DF780C5N Altera, EP2SGX30DF780C5N Datasheet - Page 50

• Manufacturer Part Number: EP2SGX30DF780C5N
• Description: IC STRATIX II GX 30K 780-FBGA
• Manufacturer: Altera
• Series: Stratix® II GXr

Specifications of EP2SGX30DF780C5N

• Number Of Logic Elements/cells: 33880
• Number Of Labs/clbs: 1694
• Total Ram Bits: 1369728
• Number Of I /o: 361
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 780-FBGA
• Family Name: Stratix II GX
• Number Of Logic Blocks/elements: 33880
• # I/os (max): 361
• Frequency (max): 609.76MHz
• Process Technology: SRAM
• Operating Supply Voltage (typ): 1.2V
• Logic Cells: 33880
• Ram Bits: 1369728
• Operating Supply Voltage (min): 1.15V
• Operating Supply Voltage (max): 1.25V
• Operating Temp Range: 0C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 780
• Package Type: FC-FBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Compliant
• Other names: 544-1754

Transceivers
2–42
Stratix II GX Device Handbook, Volume 1
f
The dynamic reconfiguration block can dynamically reconfigure the
following PMA settings:
■
■
■
The channel reconfiguration allows you to dynamically modify the data
rate, local dividers, and the functional mode of the transceiver channel.
Refer to the Stratix II GX Device Handbook,
information.
The dynamic reconfiguration block requires an input clock between
2.5 MHz and 50 MHz. The clock for the dynamic reconfiguration block is
derived from a high-speed clock and divided down using a counter.
Individual Power Down and Reset for the Transmitter and Receiver
Stratix II GX transceivers offer a power saving advantage with their
ability to shut off functions that are not needed. The device can
individually reset the receiver and transmitter blocks and the PLLs. The
Stratix II GX device can either globally or individually power down and
reset the transceiver.
signals and the Stratix II GX transceiver blocks. These reset signals can be
controlled from the FPGA or pins.
Pre-emphasis settings
Equalizer and DC gain settings
Voltage Output Differential (V
Table 2–16
shows the connectivity between the reset
OD
) settings
volume
2, for more
Altera Corporation
October 2007