EP1C12F256C7 Altera, EP1C12F256C7 Datasheet - Page 14

• Manufacturer Part Number: EP1C12F256C7
• Description: IC CYCLONE FPGA 12K LE 256-FBGA
• Manufacturer: Altera
• Series: Cyclone®r

Specifications of EP1C12F256C7

• Number Of Logic Elements/cells: 12060
• Number Of Labs/clbs: 1206
• Total Ram Bits: 239616
• Number Of I /o: 185
• Voltage - Supply: 1.425 V ~ 1.575 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 256-FBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Other names: 544-1011

Cyclone Device Handbook, Volume 1
Figure 2–6. LE in Normal Mode
Note to
(1)
2–8
Preliminary
addnsub (LAB Wide)
data1
data2
data3
cin (from cout
of previous LE)
data4
This signal is only allowed in normal mode if the LE is at the end of an adder/subtractor chain.
Figure
(1)
2–6:
Register Feedback
preset/load, synchronous clear, synchronous load, and clock enable
control for the register. These LAB-wide signals are available in all LE
modes. The addnsub control signal is allowed in arithmetic mode.
The Quartus II software, in conjunction with parameterized functions
such as library of parameterized modules (LPM) functions, automatically
chooses the appropriate mode for common functions such as counters,
adders, subtractors, and arithmetic functions. If required, you can also
create special-purpose functions that specify which LE operating mode to
use for optimal performance.
Normal Mode
The normal mode is suitable for general logic applications and
combinatorial functions. In normal mode, four data inputs from the LAB
local interconnect are inputs to a four-input LUT (see
Quartus II Compiler automatically selects the carry-in or the data3
signal as one of the inputs to the LUT. Each LE can use LUT chain
connections to drive its combinatorial output directly to the next LE in the
LAB. Asynchronous load data for the register comes from the data3
input of the LE. LEs in normal mode support packed registers.
4-Input
LUT
Register chain
connection
clock (LAB Wide)
(LAB Wide)
ena (LAB Wide)
aclr (LAB Wide)
sload
(LAB Wide)
sclear
(LAB Wide)
ADATA
ENA
D
ALD/PRE
aload
CLRN
Q
Figure
Altera Corporation
Row, column, and
direct link routing
Row, column, and
direct link routing
Local routing
LUT chain
connection
Register
chain output
2–6). The
May 2008